A friend of mine has an Audi and the navi not work. no faults code on 5F.
Do you have any idea how we can get working for Eastern Europe?. He has an Audi genuine sd card for navi. The navi works without a problem in Germany (the car was bought few months ago from there)
the scan for 5F module is as shown below:
Address 5F: Information Electr. (J794) Labels: None
Part No SW: 4G0 035 193 P HW: 4G0 035 193 C
Component: RMC Cnct Nav H51 0818
Shop #: WSC 26603 136 135502
Subsystem 1 - Part No: 8X0 919 884 D
Component: P13-50-11.06 0002
Subsystem 2 - Part No SW: 4G0 919 603 HW: 4G0 919 603
Component: DU6 Basic H42 0084
Subsystem 3 - Part No SW: 4G1 919 710 B HW: 4G1 919 710
Component: E380 BDT C7 H08 0204
No fault code found.
Any idea from where we can get started in order to make it run the navi for Eastern Europe will be great full. It's possible that this unit has activated only the maps for Western Europe? How can I activated also for Eastern Europe? Or how can I get these maps and the activation code?
Sorry for my English but i'm not a English native spoker.
He has the original card. The navi has no problem during back to Romania, traveling through Germany and Hungary. In Romania the navi didn't find any satellite and don't work event that the Romania is listed on the countries on the sd card.
Last edited by pronet_1975; 28th January 2015 at 19:10.
If not see satelites, thats not by map, can be something wrong with antena, in firmware etc... I am not sure, but think thats not possible make some rulez with GPS signal, like navi will work in D, HU, etc, but not work in Romania. Look, how many satellites are visible. If 0, then something with antena, cable or firmware, not with map.
You are right, but when I scan the 5F module, no DTC recorded (if antenna is bad that will trigger a DTC). I will check in MVB to see how many satelits is detected. The problem is also that for this module there is no label in VCDS. Maybe with the latest beta version they develop something in order to solve this issue. How can I get the latest firmware for the RMC unit? Does anybody know which are the latest one? Can I update it my self or I have to go to the dealer?
Last edited by pronet_1975; 29th January 2015 at 15:10.
In VAG you can test GPS antena, so if you will some satellites in VAG, then antena is OK and problem is in unit. Btw dead antena may not be showed as error in VAG - so do not count on VAG only and try other antena...
I.m counting on VCDS - if antenna is dead - you got error on it - open circuit, open or short to ground or intermittent. On the unit he has TMC off, and no satellites found. Unfortunately I haven't VCDS with me to re scan the unit. As soon as scan the unit i'll re-post the 5F module.