A * Austria
B * Belgium
CH * Switzerland
CZ Czech Republic
D * Germany
DK * Denmark
E * Spain
F * France
GB * Great Britain
I * Italy
NL * Netherlands
RSM San Marino
S * Sweden
V Vatican City
1) Remove all the contents from your CF-card
2) Change MagicText from the CF-Card from HARMANBECKER V5 to HARMANBECKER V6 (Winhex is included in the package)
If your MagixText is HARMANBECKER OEM V5, then change it to HARMANBECKER OEM V6.
Only update the version number, not the complete text.
So only change text V5 to V6.
- If you already installed firmware 5.2 on your Becker, then copy all the contents from CF-Karte folder to your CF-Card.
Insert the CF-Card in your Becker and installation process will follow.
After the installation process has finished you can remove all files from CF-Card, but TRACK01.raw and TRACK02.raw needs to be left on the CF-Card.
- If you still have an old software running on your Becker, then first write SystemCD_V6.iso to cd (Write as image file)
Insert Becker CD into your Becker Cascade and installation process will follow.
Copy TRACK01.raw and TRACK02.raw from CF-Karte folder to your CF-Card and insert into your Becker system.
4) If above steps went well, then you should have an updated Becker system
I have also included ECE_Q4_2013_SCDB_MARCH_2015 folder. Inside you will find an updated ECE_Q4_2013.lwd with speedcams from March 2015.
If you want this to be added, then extract the TRACK01.raw file, overwrite the original ECE_Q4_2013.lwd and rebuild the TRACK01.raw.
Last edited by Atlantis01; 10th April 2015 at 18:20.
Insert the CF-card in your becker system and do a reset:
press UPPER-LEFT + NAVI + UPPER-RIGHT simultaneously. the Cascade will "reboot" instantly
right after the reset go to the navigation menu:
•if CF card present, the system will display something like "loading data"
•if no CF card present the system will display something like "insert navigation data"
thats not the case if some navigation data already cached
If you have inserted the CF-card with the new TRACK01.raw/TRACK02.raw and have done a reset, it could be you get the message "insert navigation data".
Just wait about 10sec and it will say "loading navigation data".
Yes Atlantis i dit your steps 5 times in 2 Cascade Radios - but i think this is a BMW problem (39 and e46)
I reupdated to V5.2 also 5 times and all works well - than software 6 "pulses" "load Data" (i have also made a new calibation tour and reset to the old calibration)- therefore i think, that the my problem is the directly speed impulse from the BMW speedometer.
(I have no canbus interface connected)
This problem is not if the car stands still, but only if i moved him slowly or quickly - at the next traffic light does not pulse the "loading data", but after them it starts again.
Maybe ther is another driver with the same problems?
when i removed all files from CF-Card, but TRACK01.raw and TRACK02.raw left on the CF-Card i had the same problem, it says "load data".
I placed all the files back on the CF-Card and then after 20 or 30 seconds it Worked for me. So i leave them all on the CF-Card.
thanks for the map update. I have a becker traffic pro 7945 and tried to update it to the new software and maps. I followed the steps in post 1 (did an 1:1 copy of my working V5 CF card, changed the name and copied the data). Installation was successful, but after the restart or reboot the radio keeps asking for the navigation software. I tried the cf card with the whole installation data or only the track01 and 02 raw files. The result is the same. So I went back to V5.2, which works now.