Writer, brand, type, Book type, DVD+R/DVD-R
All questions should be directed through the forum
Private messages will be disregarded
Philips writer is doubtfull
You can check whether book type is DVD-ROM on the completed disc in the discovery menu in Imgburn
Also the log would have an entry
All questions should be directed through the forum
Private messages will be disregarded
I'm not very sure on what you mean with "doubtfull"
This is all the info under Discovery menu:
PHILIPS SPD6000L1 L5P2 (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 3.345.824
Size: 6.852.247.552 bytes
Time: 743:32:74 (MM:SS:FF)
Supported Write Speeds: 4x; 6x; 8x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1.886.032
Changeable: No
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 3345823)
-> LeadOut (LBA: 3345824)
Disc Control Blocks Information:
SONY DW-Q31AL5P2
Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519
Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519
Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.154.367
Last Physical Sector in Layer 0: 2.082.639
Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.154.367
Last Physical Sector in Layer 0: 2.082.639
Layer Information:
Layer 0 Sectors: 1.886.032 (56,37%)
Layer 1 Sectors: 1.459.792 (43,63%)
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 3345823 (0x00330D9F)
-> RS: 14.120 KB/s (10,5x) - WS: 5.540 KB/s (4x)
Descriptor 2...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 3345823 (0x00330D9F)
-> RS: 14.120 KB/s (10,5x) - WS: 8.310 KB/s (6x)
Descriptor 3...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 3345823 (0x00330D9F)
-> RS: 14.120 KB/s (10,5x) - WS: 11.080 KB/s (8x)
You can red under physical information that the book type is DVD+R DL
This means the navigation cannot handle this disc since it is not written as DVD-ROM Book Type
Doubtfull for a Philips DVD writer means that I have never seen any reports mentioning successfull burns of navigation discs
All questions should be directed through the forum
Private messages will be disregarded
Thanks a lot for your time and answers. If I'm understanding well, I have no options of burning a working navigation disc with my writer.... but if I try with other and make the book type as DVD-ROM, maybe it will work, won't it? How can I force the book type as DVD-ROM?
Last edited by gazo; 15th November 2011 at 11:53.
If you use IMGburn and click the low-end right icon for changing book-type, you'll be shown some tabs each one named with the compatible manufacturers.
Per example I have a Samsung and it's listed.
Lite On, too and several others.
Last edited by Branco80; 14th November 2011 at 05:40.
Thanks a lot. After lots of tries and different burners, I got my disc burned as DVD-ROM but it still can not be read by my mk4 (in v32 version)
I'm considering the b plan, try to eliminate other languages that are not spanish and burn in a "normal" dvd.
Last edited by gazo; 15th November 2011 at 11:51.
Even if you eliminate all languages but Spanish, the image will not fit on a DVD5
Your problem is the DVD writer
Recommended DVD Writers for Navigation software
If you must use an USB drive, take the new Plextor
Last edited by gazo; 15th November 2011 at 11:55.
All questions should be directed through the forum
Private messages will be disregarded