problem with igo8.3

[andy082]

Hi i have a problem with igo8.3 when i try to start the program load till to languages and then nothing
goes back to the main screen.... please if you know why help me.... thanks....

[duffer]

Hi i have a problem with igo8.3 when i try to start the program load till to languages and then nothing
goes back to the main screen.... please if you know why help me.... thanks....

Probably because you are using the wrong resolution entry in the sys.txt.

[andy082]

i dont know how i fix this my sys.txt it's that..what i should be change.. sorry for my english type. i am from greece,and thanks..
[folders]
has_secondary_root=0[interface]
skin="ui_igo8_da"
[3d]
fade_distance_for_car=0[folders]
app="%SDCARD%/iGO8"
fade_distance_for_guidance_arrow=0[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400[device]
type="HTC Touch HD T8282"
sdcard_dsk_num=7[interface]
skin="ui_igo8_da"[defaults]
mainroadness=60
shortessness=50
simplificationness=40

[route]
correctness=85
planned_route_weight=4
scenic_highway_weight=4
scenic_scenic_weight=2
tmc_weight=6[interface]
maxzoom2d=6000000
show_exit=1
defaulttilt3d=7600

[map]
3d_max_tiltlevel=10000[map]
2dheadup=1

3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000

[smartzoom]
minangle=0
maxangle=80[warning]
pedestrian_warning=0
speedcam_visualtype=1
speedcam_soundtype=1
speedcam_warning=1
speedlimit_warning_voice=1
speedlimit_warning_visual=1
speedwarn_tolerance=110
speedlimit_warning=1[debug]
earth=1[3d_config]
disable_roadsign_navigation_mode=0[poi]

[map]
2dheadup=1[route]
correctness=100[device]

[duffer]

Where did you get that sys.txt and what version of iGO8 are you using? First of all, it's huge and is probably causing a lot of your problems. Also, what is the resolution for your device?

Can someone here help him with a proper sys.txt for iGO8?

[Bleep55]

Here is what I am using. Hope this helps? I don't think it is any smaller but it works in my Mio c230 and C320.

[folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000

[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
defaulttilt3d=7600

[map]
2dheadup=1
3d_max_tiltlevel=7500
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1

[smartzoom]
minangle=80
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemin=8000
3dcarsizemax=8000
3dcarsizemul=10000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0

[sound]
ding=0
queue_length=200

[3d_config]
disable_roadsign_navigation_mode=0

[andy082]

i run the igo8.3,the device is mls 4810. I try to run the program without sys.txt and again the same problem stop's to the languages. I think the resolution of device is 480_272.. the program run perfect, the only think i do it's update to speedcameras,
after that i have that problem,i try to delete the speedcameras after that but nothing, i dont know what to do...... but thanks for your answers again...

[bazzle]

Change / check [GPS] baud and port to yours AND resolution under [Raw Display] and [Interface]


[folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0

[gps]
port="2"
baud="9600"
delay="500"

[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
defaulttilt3d=7600
vga=0
resolution_dir="800_480"
skin="ui_igo8"


[map]
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemul=10000
3dcarsizemin=7000
3dcarsizemax=8000



[rawdisplay]
class="landscape"
highres=0
screen_x=800
screen_y=480

[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0

[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street

[tmc]
auto_detour_calc="0"
announce_total_route="1"
ainit_on_startup="1"
new_event_recalc_timeout="5"
changed_event_recalc_timeout="5"
tmc_weight="6"
3d_tmc_road_extra_width="200"
show_tmc="1"
tmc_all_stations="1"

[traffic.settings]
;detour_acceptance_mode="0" ;no detour proposed in case of traffic jam
;detour_acceptance_mode="1" ;detour automatic
detour_acceptance_mode="2" ;detour proposed (must be accepted)


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10


[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10

[duffer]

Change / check GPS baud and port to yours AND resolution under [Raw Display]


[folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0

[gps]
port="2"
baud="9600"
delay="500"

[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
defaulttilt3d=7600
vga=0
resolution_dir="800_480"
skin="ui_igo8"


[map]
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemul=10000
3dcarsizemin=7000
3dcarsizemax=8000



[rawdisplay]
class="landscape"
highres=0
screen_x=800
screen_y=480

[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0

[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street

[tmc]
auto_detour_calc="0"
announce_total_route="1"
ainit_on_startup="1"
new_event_recalc_timeout="5"
changed_event_recalc_timeout="5"
tmc_weight="6"
3d_tmc_road_extra_width="200"
show_tmc="1"
tmc_all_stations="1"

[traffic.settings]
;detour_acceptance_mode="0" ;no detour proposed in case of traffic jam
;detour_acceptance_mode="1" ;detour automatic
detour_acceptance_mode="2" ;detour proposed (must be accepted)


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10


[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10

and also [interface]. Plus you might need to edit [gps] for your port and baud. Also make sure that you have all the entries for your particular device.

[andy082]

my friend's,thanks a lot for your answer's,i fix it,the problem was a languages zip. i change it and now run perfect... thanks again and again.. always we must to keep a backup....i learn now friend's...............