the published version (184.108.40.206577) is the latest (unlocked).
other versions (ex.: igo primo 2.1 220.127.116.115150) - whose executable
was improperly edited (version, numeral) - are not considered
valid .. are not recognized by the international community.
for more information visit cbrk.us.to.
1. packages available for free
2. never give out personal information (phone, etc.).
3. highly recommended to use adblock plus
4. be careful where you click (download).
.this version is configured to be used both in
internal memory (built-in) as the external memory (ex.: microSD HC).
.whether the path is not configured correctly, the exchange of maps will not work.
.practical method to discover the nomenclature:
1. connect your device to your computer via the windows mobile device center
2. go to: windows explorer > computer > windows ce (copy the name. ex.: DataFlash)
3. after, change the path in the corresponding file:
3.1. access the folder 'utility' (primo > utility)
3.2. open file 'utility.ini'
3.3. change 'DataFlash' for the naming of the installation site
on your device (ex. DataFlash > NandFlash; DataFlash > SDMMC)
3.3.1. naming the most common internal card: DataFlash
3.3.2. naming the most common external card: SDMMC
4. must have at least two maps:
4.1. navteq: primo > content > map
4.2. tomtom: primo > content > map_tt
.highly recommend installing the navigator on the device with 128 mb of ram.
many devices - pna, media center, etc.. - holds only 64 mb ram.
.perhaps 64 mb ram your device presents some difficulty (delay during
navigation, constant loss of signal, etc.)., i suggest not using
some files (ex.: building, dem, skins, etc.).
.do not confuse ram with internal memory (built-in).
the latter only serves to archive data (songs, etc.).
not concerned about what i call the processing power (processor + memory).
.alternatively, i made available 'sys.txt' own devices 64 mb ram.
.320-240: 3,5 inches
.480-234: 7 inches
.480-272: 4,3 or 5 inches
.800-480: 7 inches
.tip: when in doubt, consult the manual or the manufacturer's website.
.memory card (space)
.leave considerable space available on the memory card
that was installed in the navigator because when browsing multiple files
are unpacked and lack of space will cause reset and/or crash
.colorful buildings: navigation menu (home screen) > more > options >
options map > map color day / night > odytsak day / night
.green color (night): navigation menu (home screen) > more > options >
options map > map color day / night > optovizor3-night
.access (map options) may be from the cockpit screen (navigation).
.additional package (colorful | choto): access topic > extras (above).
.need to change the types of alerts to the language of their country.
ex.: primo > sys.txt > S P E E D C A M - C A T : 0 > activated_speech=Atencao, Radar Fixo logo à frente.
.available speedcam file updated until 15.11.2012
.search for a forum or site in your country that provides updated files speedcam (speedcam.txt)
.installation (primo > content > speedcam)
.perhaps try some delay during navigation
i suggest replacing the executable (see 'extras' above).
.consider installing 'sys.txt' alternative (extras > sys.txt 64 mb ram)
.first shipment (signal)
.he first shipment is always more time consuming.
.wait for the loading of the satellites (5-7 minutes).
.manipulate your device in the open or at least near a window.
.snoring motor (remove)
.dimka skin: navigation menu > more > options > sounds and alerts > sounds to start and exit > sound when starting > none
.skin gj-ak: navigation menu > more > options > settings gj-ak > speed alerts > sound when starting > none
.historical: primo > save > profiles > 01 > history.sav
.favorites: primo > save > profiles > 01 > user.upoi
.routes: primo > save > profiles > 01 > routes > name.dat
.large numbers (road)
.dimka skin: navigation menu (home screen) > more > options > config. special (laboratory icon) > show house numbers (large)
.skin gj-ak: navigation menu (home screen) > config. special (laboratory icon) > show house numbers (large)
.acess: config. special (activates / deactivates).
.recommended only for use with the skin dimka
.folder (music | picture)
.music: insert your music into the folder 'music' (primo > content > music)
.picture: insert your picture into the foler 'picture' (primo > content > picture)
.skin (fast access)
skin dimka: cockpit screen (navigation):
.quick tap on the button right below> right side menu
.touch slow in the lower right button> main navigation menu (home screen)
.touch fast speed button (bottom left)> main navigation menu (home screen)
.touch slow in speed button (bottom left)> exit the navigator (right cockpit)
.touch the bottom bar > access to other features.
.street names (without balloon)
.procedure: primo > sys.txt > go to entry [3d_config] > enter this command:
disable_roadsign_navigation_mode=1 > save > access the navigator
.changing skin (operation)
.navigation menu (home screen) > more > options > display >
theme day / night (choose skin) > restart
.procedure return to original voice (not "metallized"):
primo > sys.txt > delete the entire command [dynamiccompressor] > save > start your navigator
.note: to return to the 'natural' volume (voice) will be lower.
.navigation: various information (track speed, therefore, etc.) are provided
by the companies that release their files (map, poi, etc.)..
.radar information (speed, etc.) are (gently) provided by site or forum (your country).
i have a little problem though. the music player doesn`t work, and it doesn`t load the files. the version from zervedim works ok, but your primo version does look a little bit batter.
i`m interested in using this version, but with the music player, because my gps has an fm modulator, so all the music (and navigation voices) i was listening on my car speakers.