1. deployment of traffic feature (brazil)
2. ux: low emission zone for skin gj-ak
3. dual zone: installation in internal or external memory
4. navigation more "fluid" (considerable processing gain)
5. skin dimka: alert speeding enabled
6. codes and / or commands revised
7. several built-in functionality (agility)
8. icon pack (bra: 480-272, 800-480) international standard
9. technical corrections (content)
.originally navigator igo primo is indicated for
devices with 128 mb (real) ram (or higher).
.international package: please insert content (voice, maps,
language, etc..) for your country.
.320-240: 3,5 inches
.480-234: 7 inches
.480-272: 4,3 or 5 inches
.800-480: 7 inches
.tip: when in doubt, consult the manual or the manufacturer's website.
1. packages available for free
2. never give out personal information (phone, etc.).
3. highly recommended to use adblock plus
4. watch where you click (download)
5. the "host" mega prefer google chrome
.this version is configured for use in both
internal memory (built-in) as the external memory (eg microSD HC).
.whether the folder is not configured correctly, the exchange of maps will not work.
.practical method for discovering the nomenclature:
1. connect the device to your computer via the windows mobile device center
2. go to: windows explorer > computer > windows ce (note the name. former.: DataFlash)
3. after, change the path in the corresponding file:
3.1. access the folder 'utility' (primo > utility)
3.2. open file 'utility.ini'
3.3. change 'DataFlash' for the naming of the installation site
in your device (eg DataFlash > NandFlash; DataFlash > SDMMC)
3.3.1. naming the most common internal card: DataFlash (or NandFlash)
3.3.2. naming the most common external card: SDMMC
4. must have at least two maps:
4.1. navteq: primo > content > map
4.2. tomtom: primo > content > map_tt
.details: access cbrk.us.to.
.enable | disable (access): navigation menu > more > options >
special settings > display junctions (mini) > (de)activate
.packages configured to, when switching maps (nt > tt), not exchange files poi (nt > tt).
.to, when changing map + poi (nt > tt) change: swpoi = 0 to 1 (primo > utility > utility.ini)
.perhaps have configured to exchange joint map-poi, to return to mapa_nt necessary to return / replace
poi_visibilities originating file (primo > save > profiles > 01 > poi_visibilities).
.package poi_br only meets the poi_nt (fuller).
.recommends that you install the navigator on the device with 128 mb of ram.
many devices - pna, media center, etc.. - holds only 64 mb ram.
.few devices (i had several) say they have 128 mb ram, which in practice is not confirmed.
.perhaps your device 64 mb ram presents some difficulties (delays during navigation,
constant signal loss, etc..), i suggest you do not use some files (eg, building, dem,
different skins, poi, etc.).
.did not confuse ram internal memory (built-in).
latter only serves to archive data (music, etc..);
not concerned about when i call processing power (processor + memory).
.alternatively, take note of the item navigation (delay, inconsistency).
.3D buildings (flatten)
.to flatten 3D buildings (saving memory),
enter this command in the file sys.txt (primo > sys.txt):
.street names (default igo8)
.enter this command in the file sys.txt (primo > sys.txt)
.to make more transparent the bar on the right side (quick):
cockpit screen (map) > arrow top right >
map options > transparency settings >
button (reduce to the desired level), or
access the file system.ini (primo > save > profiles > 01)
and, on the [lua], enter the following command:
.memory card (space)
.leave considerable space available on the memory card
it was installed because the navigator when browsing multiple files
are unpacked and lack of space will cause reset and/or crash
.map colors (scheme)
.green (night-time): navigational menu (home screen) > more > options >
options map > map color day / night > optovizor3-night (night)
.access (map options) can be done from the cockpit screen (navigation)
.access their own forum for their country of origin.
.navigation (delay, inconsistency)
.perhaps try some delay during navigation
or any insconsistência (voice loss, etc..) suggest:
1. using previous versions of the file .3 dc (building).
2. insert successively these commands in sys.txt (primo > sys.txt):
.the first shipment is always more time consuming.
.wait for the loading of the satellites (5-7 minutes, check the menu of your device).
.manipulate your device in the open, or at least near a window.
.snoring motor (remove)
.skin dimka: navigation menu > more > options > sounds and alerts > sounds when starting and leaving > sound when starting > no
.skin gj-ak: navigation menu > more > options > settings gj-ak > speed alerts > sound when starting > no
.historical: primo > save > profiles > 01 > history.sav
.favorite: primo > save > profiles > 01 > user.upoi
.routes: primo > save > profiles > 01 > routes > name.dat
.big nambers (street)
.only for resolution 480_272:
.skin dimka: navigation menu (home screen) > more > options > config. special (laboratory icon) > show house numbers (large)
.skin gj-ak: navigation menu (home screen) > config. special (laboratory icon) > show house numbers (large)
.access: config. special > activate > lcd: touch (enabled), touch more time consuming (disabled)
.ux low emission zone (skin gj-ak)
.available only for resolutions 480_272 and 800_480.
.insert the file directly in the folder ux (primo > ux)
.they not going to use the functionality, to avoid failures (other skins), remove it from the folder ux.
.procedure: download file (ux) and activate voice (access: the navigation menu (home screen) > options>
sounds and alerts > low emission zone > enable voice + tts pro > talking low emission zone.
.may require some translation (lang, voice)
.folder (music | image)
.music: insert your songs inside the folder 'music' (primo > content > music)
.image: insert your images in the folder 'picture' (primo > content > picture)
.access: config. Special (enable / disable).
.recommended only for use with the skin dimka
.skin dimka: cockpit screen (navigation) > click on the name of the next track (top, center) > click the desired waypoint
.skin gj-ak: cockpit screen (navigation) > arrows button (top left) > click the desired waypoint
.to assign value (average) of the fuel:
home screen (menu navigation) > more > options > route settings > vehicle > button key
english > price of fuel (average value attribute: price of gasoline + ethanol price / 2)
.tts by wiman
.disable talking place name:
home screen (menu navigation) > more > options > sounds
and alerts > tts by wiman > speaking local name > not
.disable talking estimate (destination, etc..):
home screen (menu navigation) > more > options >
sounds and alerts > tts by wiman > speak estimate > not
.disable time (talk estimates):
home screen (menu navigation) > more > options > sounds and alerts >
tts by wiman > repeat every > decrease / increase the time.
.skin (fast access)
skin dimka: cockpit screen (navigation):
.touch faster in right lower > right side menu
.touch consuming the right lower > back to the navigation menu (home screen)
. touch fast speed button (bottom left) > main menu navigation (home screen)
. touch slow in speed button (bottom left) > exit the navigator (straight from the cockpit)
. touch the bottom bar > access to other features.
.skin change (operation)
.navigation menu (home screen) > more > options >
display > theme day / night (choose skin) > restart
.observation: to avoid failure, to exchange, replace both skins (day and night).
.navigation: various information (track speed because, etc.). are provided
by the companies that provide their files (map, poi, etc.).
.radar information (speed, etc.). are (kindly) provided by website or forum of your choice.
.panic button (access)
.skin gj-ak: navigation menu (home screen) > see map (cockpit screen) >
button long press time / date (top right).
.correction, update: go to cbrk.us.to
.this work has a bit each of the nodes .. enjoy!
.this work is not intended to be exhaustive (gps) in any sense.
.before any operation,
always do prior backup.
Last edited by cbrk; 28th September 2013 at 14:28.
.resolution 480-272 or 800-480
.other resolutions: can be used in the resolution 480-272 (file)
.módulo ux mini-jv (480-272 | 800-480)
.dual display (junctions nng on the "data.zip" + ".fjv" file)
.mini-jv operational (mini, full screen)
.delete the file minijv_20 (primo > ux)
.insert the file minijv_24 (primo > ux)
.replace the files sys (sys, sys_ot and sys_ta or sys_tt)
.turn on the display mini-jv (module): navigation menu > more >
options > special settings > display junctions (mini) > (de)activate
.packages cbrk: delete the folder "config" from skins dimka, kastel e tomsoft
(primo > content > skin > double click the file > delete the folder "config")
.not cbrk packages: disregard sys files (package) and
enter these commands in your file(s) sys (sys and sys_ot):
I'm using 480-272 of your version in WinCE 6 (for US Navteq 2013.Q1). Thank you so much it's works awesome.
I have a problem. when I try to look around places in the map it is giving "FATAL ERROR" (See Below picture)
please help me.
and one more thing in that same place there is IRVING gas station the other versions is showing that brand icon but with this version it is not showing that gas station also. I checked all places completely but it is not showing that place.
Last edited by pydipala; 14th September 2013 at 14:02.
I finally figured out about the problem regarding the fatal error. If we change the default vehicle the problem is showing up. If we don't change the vehicle there is no error everything works fine.
However, I found a problem with branding. If I put the view mode in map settings to 2D I could see all the brands of the locations. But when I change the view mode to 3D the same brands disappeared.
Please help me with this issue. I am eagerly waiting for your reply.
Last edited by pydipala; 16th September 2013 at 10:54.