Need Help with Dimka MAPCHANGER on Takara GP34

[Mimmo59]

Can anyone help me to get MAPCHANGER to work on this device. I am running Primo 2.0 and using diMkaWA_153.

I think the sys.txt or utility.sys are are not set up properly. MAPCHANGER seems to try to work... reboots etc., but the map stays the same.

MapChanger.exe is in a folder named Utility in the Primo2 folder in the root directory of the Flash Memory.

The content folder is in SDCARD.

backup, save and ~temp folder are in MemoryFlash

I have the 3 folders in the content section...map (with !MAP_TT.txt inside) ; map_nt (with !MAP_NT.txt); and map_ot (with !MAP_OT.txt) with appropriate maps.


In the SYS.TXT i have

[folders]
app="/ResidentFlash/Primo2"
content="%SDCARD%\Primo2\Content"
;has_secondary_root="0"



In the UTILITY.INI i have

[general]
DirContent=%SDCARD%\Primo2\Content
DirSave=.\save
ExeName=Primo.exe
Sound=set.wav

[mapchanger]
swpoi=1
swbuilding=0
swhistspeed=0
swphoneme=0

[backup]
BackupDir=..\backup
BackupCount=3

[utility]
TempHidePath=.\~temp

Thank you so much.

Mimmo

[cupacups]

sis text in my gps maybe help i have igo primo 2 works super


[device]
type="Prestigio5100BT"

[rawdisplay]
class="landscape"
highres=0
screen_x=480
screen_y=272

[folders]
app="%SDCARD%/Primo2"
data="/SDMMC/Primo2" ;
content="/SDMMC/Primo2/CONTENT"
kmlpoi="userdata\poi" ;"content\userdata\poi"
kmlroute="userdata\route" ;"content\userdata\route"
;user_car="mycars"
tts_nua_v5="\SDMMC\Primo2\tts_nua_v5"
tts_loq="\SDMMC\Primo2\TTS_LOQ" ;needs loqmsx.dll LoqTTS6.dll LoqTTS6_util.dll LoqDutch6.5.dll
has_secondary_root=0

[gps]
port=1
baud=38400
source=nmea
set_messages=0

[interface]
extra_settings=1
shutdown_time=0
start_navigation_time=5
max_flag_distance_3d=3000
recalc_voice=0
show_minimize=1
mapfontscale=120
start_navigation_time=5
resolution_dir="480_272"
vga=0
show_tmc_eventlist=1
show_exit=1
show_tmc_config=1
show_programs=1
extra_settings=1
drive_carefully=0
laneinfo_signpost_enabled=1

[traffic.settings]
save_traffic_events=0
load_traffic_events=0

[navigation]
show_city_in_next_street=1
show_city_in_next_street_distance=1000

[power]
powermgm_state=0

[tmc-http]
enabled = 1

[bluetooth]
btappl="\ResidentFlash2\MyShell\Bluetooth.exe"

[transmitter]
fmappl="\ResidentFlash2\MyShell\FM.exe"

[route.histspeed]
enabled=1
show=1
use_timeslice=1

[debug]
experimental_features=1
show_battery_percent=1
skip_eula=1
reserve_memory=1500000
cache=262144
hnr=1
show_hnr=1

[mapchanger]
map_tt="TELEATLAS" ; - you can write other title
map_nt="NAVTEQ"
map_ot="TOP MAP"

[sound]
maneuver_chimes=0
welcome=test
wheelsound=1
pause_mp3_sooner=1

[route]
correctness=100
guidance_at_highway_entry=1
auto_enable_permit_needed=0
guidance_at_highway_exit=1

[camera.roundabout]
enabled=0

[network]
available="1"

[sound]
csv_voice_enabled=1
welcome=test
wheelsound=1

[poi]
use_poi_mapping=5
use_multi_poi_icon=0

[loading]
show_statustext=1

[gps]
background_navigation=1

[timezone]
patch_dst=1
sync_time=1
use_auto=1
sync_os_timezone=0
reset_os_timezone=0

[timezones]
use_timezone_setting_fix=1
use_new_timezone_ini=1
timezone_key="Time Zones"

[3d]
planned_route_contour_width=4
use_all_building_textures=1
fade_distance_for_car=0
fade_distance_for_guidance_arrow=0
fade_overlap_tolerance=0
fade_around_cursor=1
max_pois_on_horizont=5
max_poi_mapping=5
poi_mapping=5
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0

[navigation]
show_city_in_next_street=1
show_city_in_next_street_distance=1500

[other]
demo_enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemin=9000
3dcarsizemax=15000
3dcarsizemul=80000
3d_max_tiltlevel=9000
3d_min_zoomlevel=20
poi_distant_distance=200
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0
poi_mapping=5
use_poi_mapping=5
max_poi_mapping=5
max_pois_on_horizont=5
show_pois=0
use_multi_poi_icon=0

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[3d_config]
disable_roadsign_navigation_mode=0
roadsign_bitmaps=1
roadsign_always_framed=1

[sound]
csv_voice_enabled=1

[vmc_voice]
enter_script="sc_volmanager_voice"
vmc_effect=100
vmc_media=40

[route]
minimum_hnr_distance_km=100
guidance_at_highway_entry=1

[route.histspeed]
enabled=1
show=1
use_timeslice=1

[route.histspeed.timeslice]
day=1
hour=8
minute=1

[traffic.settings]
save_traffic_events=0
load_traffic_events

[naviextras]
boot_service_address="http://zippy.naviextras.com/services/index/1"

[tmc-http]
servers.size=1
servers[0].url="http://zippy.naviextras.com/services/tmclite/data/nng-igo-tmc-iphone/0/"
enabled=1
start=1

[other.fm_transmitter]
fmtx_enabled=1 ;


[traffic.settings]
save_traffic_events=0
load_traffic_events

[vr]
disabled=0

[warning]
speedlimit_warning_visual=1
speedcam_warning=1
is_spoken=1
speedcam_max_lookahead=2000
speedcam_maxdistance_from_road=10

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Caution speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:140 0,110:1300,100:1200,90:1100,80:1000,60:700,50:600, 40:500"

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Caution mobile speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:140 0,110:1300,100:1200,90:1100,80:1000,60:700,50:600, 40:500"

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Caution traffic light camera"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,50:500,40:2 00,20:100"

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Caution average speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:140 0,110:1300,100:1200,90:1100,80:1000,60:700,50:600, 40:500"

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Caution traffic light ahead"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,20:500"

[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Caution bus lane camera ahead"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,20:500"

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Caution dangerous railway crossing"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Caution scholl zone ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Caution town entry point"
;overspeed_spoken_type=1
warn_distances="0:2000"

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Intimidation radar"

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Caution toll ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Caution hospital"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Caution fire Station ahead"

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Change taxi zone"

[speedcam_category:16]
activated_spoken_type=speech
activated_speech="Caution give way"
;overspeed_spoken_type=1
warn_distances="0:200"

[speedcam_category:17]
activated_spoken_type=speech
activated_speech="Caution dangerous crossing"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:18]
activated_spoken_type=speech
activated_speech="Caution speed breaker"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:19]
activated_spoken_type=speech
activated_speech="Caution Children ahead"
;overspeed_spoken_type=1
warn_distances="0:100"

[speedcam_category:20]
activated_spoken_type=speech
activated_speech="Caution dangerous Turn"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:21]
activated_spoken_type=speech
activated_speech="Caution tunnel ahead open your lights"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:22]
activated_spoken_type=speech
activated_speech="Caution dangerous road ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:23]
activated_spoken_type=speech
activated_speech="Police department"

[speedcam_category:24]
activated_spoken_type=speech
activated_speech="Caution dangerous area"
;overspeed_spoken_type=1
warn_distances="0:800"

[speedcam_category:25]
activated_spoken_type=speech
activated_speech="Caution black spot"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:26]
activated_spoken_type=speech
activated_speech="Caution closed road"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:27]
activated_spoken_type=speech
activated_speech="Caution congestion ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:28]
activated_spoken_type=speech
activated_speech="Caution constriction ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:29]
activated_spoken_type=speech
activated_speech="Caution low visibility ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:30]
activated_spoken_type=speech
activated_speech="Caution low bridge ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Caution dangerous point"
;overspeed_spoken_type=1
warn_distances="0:500"

[camera1]
maxdistance=500
minzoom2d=50
maxzoom2d=200
defaultzoom2d=300
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=45
defaultangle=80
angleoffset=65
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80

[camera11]
maxdistance=500
minzoom2d=50
maxzoom2d=300
defaultzoom2d=400
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=50
defaultangle=80
angleoffset=43
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80

[cupacups]

1. Put "UTILITY" folder in Primo's root
2. Open UTILITY\utility.ini and check DirContent= for example:
\SDMMC\NNG\Content or \Storage Card\Primo\content or ...)
3. Check ExeName= (iGo.exe or Primo.exe or ...)
4. In Content folder create subfolders: map (if your default are TT maps), map_nt (for NT),
map_ot (for other maps) and copy to each folder at least 1 map.
5. For change POI together with maps, set: swpoi=1 and create same folder
structure as for maps (poi, poi_nt, poi_ot)
Similarly can be configured to switching the following folders:
BUILDING (swbuilding=1, folders building_tt, building_nt, building_ot),
HISTSPEED (swhistspeed=1, folders histspeed_tt, histspeed_nt, histspeed_ot),
PHONEME (swphoneme=1, folders phoneme_tt, phoneme_nt, phoneme_ot).

6. For correct map provider determination please place to each
map folder one small file (may be empty, only the name is relevant.
Examples are in the folder '_copy_to_the_corresponding_map_folder'):
!map_tt.txt - for the Tomtom (former Teleatlas) maps
!map_nt.txt - for the Navteq maps
!map_ot.txt - for other provider's maps
In this case the skin will set the provider correctly during program
start and prevent displaying wrong provider that can be caused by possible
Mapchanger's fault.

7. MapChanger can be accessed from Quick Menu.

8. Enjoy


Primo 2.0.7z Download - Directmirror.com - Upload & Mirror your files! igo primo 2 full

[cupacups]

Primo 2.0.7z Download - Directmirror.com - Upload & Mirror your files! igo primo 2 full tested

[Filsteve]

All above ok, but you must include to sys file some parameters
For Greek freinds of this forum
Solved mapchanger, πως λειτουργεί

[nppa]

4. In Content folder create subfolders: map (if your default are TT maps), map_nt (for NT),
map_ot (for other maps) and copy to each folder at least 1 map.
Primo 2.0.7z Download - Directmirror.com - Upload & Mirror your files! igo primo 2 full

What if you only have one map provider? Do you still have to have the map-file structure, or can you just use the default structure?

I ask because I have some problems applying skins to Primo 2.4, and I don't know whether it is related to the map-structure.

[ant40]

What if you only have one map provider? Do you still have to have the map-file structure, or can you just use the default structure?

I ask because I have some problems applying skins to Primo 2.4, and I don't know whether it is related to the map-structure.

If you have only one map provider - you need only one subfolder map (content/map)