-
mio moov 200 - factory settings
Hi,
I think that when you try to unlock device, mistakenly deleted a file system.
If anyone can send me a list of files located in the folder Program Files\MioMap
Thanks,
p.s. jos ako moze neko ko se razume da me kontaktira, bio bi zahvalan
-
-
29th January 2013, 19:43
#2
Re: mio moov 200 - factory settings
Hello guys! This is my first post! 
I have a mio moov model which is named as N177 on the back of the Gps. I found on the Net that this is the model most known as: mio moov 200 or mio moov 210 (as i have read on some forums...). This Gps comes from Greece if this helps...
I have the a problem when i open it. It's the common problem with the Appstartupsec.exe illegal operation...
When i try to connect it to my PC through the USB port it is not recognized. I tried to make visible the blue screen that i read on forums, but there is no circuit inside the Gps named Cobia (i wanted to make the unlock-reset method with the pins).
On the inside green board of the Gps is written : CobiaT300_MB, if this helps.... (not a circuit, just typed letters on the green board).
Can anyone give some help please? I have read thousands of posts on the Net, but no result yet because i have found a few things about this specific model!
Thanks in advance!
-
-
29th January 2013, 21:24
#3
Re: mio moov 200 - factory settings
navigator0 Cobia_T300_MB.zip Cobia_T300_MB copy folder on a SDCard-FAT32.Start the device and it reaches the orange screen,insert SDCard..
-
-
30th January 2013, 20:34
#4
Re: mio moov 200 - factory settings
Gyany thanks a lot for your answer!!
I'll try it tomorrow and i will inform you. I hope this will finally work! :-)
-
-
31st January 2013, 16:41
#5
Re: mio moov 200 - factory settings
I have tried many times to load from the SD card, but the gps does not respond...
It can't read the files...Any ideas?
-
-
31st January 2013, 17:14
#6
Re: mio moov 200 - factory settings
navigator0 iboot.zip Unzip and copy folder ,,iboot" on a SDCard-FAT32.Start the device and it reaches the orange screen,insert SDCard..If it does not work try method Pin9
-
-
31st January 2013, 17:47
#7
Re: mio moov 200 - factory settings
Sorry this didn't work either!
The problem with pin 9 is that there is no chip named cobia...It's a model with a different board. the model number on the back of the gps says N177.
-
-
31st January 2013, 18:13
#8
Re: mio moov 200 - factory settings
-
-
1st February 2013, 20:52
#9
Re: mio moov 200 - factory settings
no lucky again! Anyway, thanks a lot for your time!!!
-