Garmin Mobile PC - Chinese 5.00.60g

[Mathiotte]

Just put inside MobilePC folder, you can use map called gmapsupp.img and gmapprom.img with MobilePC

I´m so newb!!! But Kor@l you are Master!!!

I went to MapSource, select regions of map to export....and export them to MobilePC....it creates gmapsupp.img automatically in MobilePC folder.

Start MobilePC and wait a few seconds....and bummm, it works just fine.


A off topic question: with 62s we must put in system configuration - GPS interface in "Garmin Spanner"?? Is the only way the 62s comunicates with PC, but the accuracy is to low (inside of house, near window). All other available, when connect the usb cable, the GPS turns off
Is there any other way that i´m missing?

Many thanks and keep the good work

[billy bignutz]

Downloaded and installed fine on PC and using Aus & NZ 2012.20 maps loaded via mapsource BUT cannot search on any address outside NSW or NZ. Any ideas? I have tried different map versions and reinstalling software but it always comes up with the same problem.

Can anyone give me a pointer as to which file determines how to search on address so that maybe I can work it out from there?

FYI I found that when I crossed the border to Qld I could only search on Qld addresses. It seems to be missing the question 'what state' ??

[biosfix]

key in sw.unl not working

Well, I can browse map, but sw.unl seems not working. I did find the ID in software. I did chose Mobile PC when I generate key.
I know my extension is not TXT, because I know MS-DOS very well.

But still, no key working.

Any idea?

------------------------
edit: later, run again, ID changed, and generate new key, everything works.

[jawood]

Hi I have installed this on my win7 car pc and when connecting to usb gps it works fine if i then install xport to get virtual comm ports so i can run more than one gps software eg windows location drivers it wont detect the gps on the virtual comm port, if i go inn and install as trial without garmin gps harware option it finds the virtual comm port and works fine. My question is, is there a wau to get it to work with the virtual comm port using the key gen??

Thanks in advance to anyone that can help with this..

[gpsn]

Hi, Please HELP ...
I am very new … I think that I have everything need for “Garmin Mobile PC”.
I successful unpacked “Garmin MobilePC” and run Que.exe;
The Installer asks for product key;
Then I run “Jetmouse” it asks for “Unit ID”;
Where/How can I find it in VAIO laptop ???
Please HELP, I need and appreciate a tutorial to start from zero, thanks

[bjjfc]

Hi, Please HELP ...
I am very new … I think that I have everything need for “Garmin Mobile PC”.
I successful unpacked “Garmin MobilePC” and run Que.exe;
The Installer asks for product key;
Then I run “Jetmouse” it asks for “Unit ID”;
Where/How can I find it in VAIO laptop ???
Please HELP, I need and appreciate a tutorial to start from zero, thanks

in Garmin MobilePC apps > Settings > About
tutorial on how to unlock gmpc - Pictures Tutorial For the Dummies On how to unlock Garmin Mobile XT on your phone

[jelbear]

Evening All


The unlock code just doesn't seem to be working for me, this is what I've done

Installed software

selected No for garmin GPS hardware
Selected free Trial
Went to settings-About, got 10 digit numerical code
entered above code into Jet mouse
having selected GarminPC

entered resulting 25 digit into a notepad file, saved file as sw.unl into the root GarminMobilePC folder

But every time I open GarminPC it always asks whether I've got the Garmin hardware, which I answer no to and then it always asks for a product key.

What am I doing wrong?

Any help would be gratefully received

cheers

James

[jelbear]

managed to answer my own problem.

The answer for anybody else that finds themselves in my situation is that when first opening GMPC after installation you must choose have Garmin GPS hardware.


If you managed to start this software in Trial Mode (like I did), you won't see any "Device ID" in your Settings -> About page.
You will find a kind of "Software Unit ID" instead and you CANNOT GENERATE an unlock code for it!!!
If this is your case, close down GMPC, then go to C:\Documents and Settings\<USERNAME>\Application Data\Garmin\GarminMobilePC
and delete its content. Then start again making sure to click on the have Garmin GPS hardware then go through the create sw.unl file proceedure

hope this helps anyone who finds themselves in my position

[sanscorp]

links are dead, anyone willing to share the latest available version or am I missing something?

[etrangere]

OK， gotcha