insignia NS-NAV01 and NS-NAV01c and miopocket

[d3400]

Hi,

I have manged to get miopocket on my NS-NAV01. However I can't get the gps signal. I was told by someone that I need to adjust my port & baudrate.

1) I don't know what those are, I tried to google it but nothing comes up.
2) If I did have it where do I change those numbers

Can anyone help me with this please?

Thanks,

[bads3ctor]

Insignia NS-NAV01 GPS is at Com port 7 Baud rate is 4800. Some applications automatically find this and some don't so you may need to add it manually.

[traian1]

Much thanks dohcacr. I'm going to try this over the weekend. I just got the NS-NAV01c.

So the way I understand, is just replace add this to a 2GB card, plug it in and it should be good to go? Or should I follow the OPs steps first?

First time I take a try at unlocking one of these devices...

This configuration was created, by me, for the Insignia NS-CNV43 using xtyler92's universal sd unlock. It should work for a NS-NAV01 as well. Xtyler92 deserves all the credit, I just adapted it for the Insignia GPS and my personal needs. This unlock as configured, has selections for IGO8 and Primo. It also has a few applets(book readers, calculator, etc).



If you want to try it, it's at

http://dl.dropbox.com/u/6599614/NS-CNV43UNLOCK.rar

This configuration should be extracted to the root of your storage card. Your igo8 and primo directories should also be at the root of the storage card and named IGO8 and igo_primo(or make appropriate changes to the mainpage.ini file). Once that is done, just power cycle the GPS and it should load the new menu with IGO8 and Primo selections Let me know if it works for you, or if you have any questions.

Xtyler92's original readme file will be at Storage Card/WLNANavi480_272/README FIRST once you have extracted the archive to your storage card. That file explains all the magic of the unlock and how to modify it to your needs.

[dohcacr]

So the way I understand, is just replace add this to a 2GB card, plug it in and it should be good to go? Or should I follow the OPs steps first?

That's correct. Of course, you will need the nav applications IGO8 and/or IGO Primo installed at the root of your card as well. The IGO apps should be in folders named IGO8 and igo_primo, or you will need to modify the mainpage.ini file. If you are going to install both IGO8 and igo_primo on a 2gb sd card you will need to share the content of IGO8 with Primo. I can tell you how to do that if necessary.

[traian1]

That's correct. Of course, you will need the nav applications IGO8 and/or IGO Primo installed at the root of your card as well. The IGO apps should be in folders named IGO8 and igo_primo, or you will need to modify the mainpage.ini file. If you are going to install both IGO8 and igo_primo on a 2gb sd card you will need to share the content of IGO8 with Primo. I can tell you how to do that if necessary.

That's my last question... how to share the maps.

Thank you sooo much dohcacr

[atlas1321]

This configuration was created, by me, for the Insignia NS-CNV43 using xtyler92's universal sd unlock. It should work for a NS-NAV01 as well. Xtyler92 deserves all the credit, I just adapted it for the Insignia GPS and my personal needs. This unlock as configured, has selections for IGO8 and Primo. It also has a few applets(book readers, calculator, etc).



If you want to try it, it's at

http://dl.dropbox.com/u/6599614/NS-CNV43UNLOCK.rar

This configuration should be extracted to the root of your storage card. Your igo8 and primo directories should also be at the root of the storage card and named IGO8 and igo_primo(or make appropriate changes to the mainpage.ini file). Once that is done, just power cycle the GPS and it should load the new menu with IGO8 and Primo selections Let me know if it works for you, or if you have any questions.

Xtyler92's original readme file will be at Storage Card/WLNANavi480_272/README FIRST once you have extracted the archive to your storage card. That file explains all the magic of the unlock and how to modify it to your needs.

not working for me. nothing happens. i installed the three files on the sd card nothing else. on bootup the devise asks to insert an sd card. what is the name of the flash drive. i figured out that the sd card is called sdmmc on the insignia ns-nav01

thanks

[Malouff]

I removed my unlock file as dohcacr deservies all of the credit and has hosted the unlock

NS-NAV01 SD UNLOCK Download

Unrar the archive to the root of your SD card. Your igo8 and primo directories should also be at the root of the storage card and named IGO8 and igo_primo(or make appropriate changes to the mainpage.ini file). Power cycle the NAV01 and it should bring up the menu screen. If your directory structure has IGO8 and igo_primo folders at the root, both apps should load.

However look at the mainpage.ini as it still has references to WLNANavi480_272
Such as \SDMMC\WLNANavi480_272\Apps\off.exe and \SDMMC\WLNANavi480_272\Apps\CECMD.exe
They need to be changed to
\SDMMC\CNAV\Apps\off.exe and \SDMMC\CNAV\Apps\CECMD.exe

I also found Xtyler92's site but it does not have valid links to most of his unlocks but did find one that looks like it was used for the base model in this example

[Malouff]

If you are going to install both IGO8 and igo_primo on a 2gb sd card you will need to share the content of IGO8 with Primo. I can tell you how to do that if necessary.

Please do share share both sys.txt files as a upload or in a code block

[dohcacr]

I also found Xtyler92's site but it does not have valid links to most of his unlocks but did find one that looks like it was used for the base model in this example

That is my download also! Thanks for correcting my incorrect assumptions about the NS-NAV01.

[atlas1321]

Thank a miilion for spending the time to help