I wondered if anyone can help me, I have been given a Becker Traffic Assist 7934 and it will not boot up, when you turn it on all you get is a red screen and a symbol in the middle of the screen. If I connect the device to my laptop the software doesn't recognize the device and when i go into devices and printers the Becker is listed as a windows powered pocket pc (my laptop is running windows 7).
Can anyone point me in the right direction so i can connect to the device and re-install the software.
Put this arhive content of WinCE 4.2 original flash upgrade of Becker 7934 (contains OS upgrade) on an sd card (formatted in FAT not FAT32, 512MB or 1GB) and revive your unit, for pc connection use Windows Mobile Center (to connect your unit to pc) if you use Windows 7 and Microsoft Activesync for XP.You can change the original navigation software (NAVIGON) after that, with iGO8 (you need an unlock for this).So,
1.Prepare the sd card with arhive content downloaded from this http://rapidshare.com/files/154264553/Becker_7934.rar
2.Reset your unit (you need to have the unit charged)
3.Refresh your WINCE 4.2 (unit OS)
4.Format the sd card after that and put this unlock in it http://rapidshare.com/files/23249826...0%20Unlock.rar
5.Download iGO8 software put it in sd card ,like the unlock, and populate with maps and rest of the files .Try iGO 188.8.131.52873 (working and tested)
Please help, I desperately searching all over internet firmware for Becker 7934 EC107, I need two files WINCEIMG.BIN and WINCEIMG.CKS. I have found 7934 files (also in this thread) but they are not for EC107, when I flash with these files I only get stucked with Becker logo and white line on right side of screen. Thank You!
Thank You for Your effort and it's really appreciated, but this is the same file like we have above from Mihai. Yes this is rom for Becker 7934 but not for EC107, this is for EC100, or EC101 or ECwhatewer.