New firmware version R42.01 for NG4 Navidrive 3D

[AlexDee]

Ok, this is part one:
Zippyshare.com - NG4_SW_N42b_42.01.part1.rar

And part two:

Zippyshare.com - NG4_SW_N42b_42.01.part2.rar

ENJOY !!

[gerrysc]

Hi - mky feedback
I did the Update on my C5 (2011). First time I had to reburn the CD because of read-faillures.
My hint: if the update stis stucking (some seconds without the % is running) - interrupt (only by disconnectin battery) and restart with a new medium.

At the second trial all worked fine - Firmware upgraded !
thanks to all
Gerry
Autriche

[Petrinho]

Hi - mky feedback
I did the Update on my C5 (2011). First time I had to reburn the CD because of read-faillures.
My hint: if the update stis stucking (some seconds without the % is running) - interrupt (only by disconnectin battery) and restart with a new medium.

At the second trial all worked fine - Firmware upgraded !
thanks to all
Gerry
Autriche

for me was the same...but i'can't update...via CD and via USB...was the same...

[cporeaux]

Piece of advice : use usb stick. A guy i know has a failed with cd medium...

[Calagane]

Mise à jour effectuée sans problème avec un SD Card

[toner_cloud]

Hi - mky feedback
I did the Update on my C5 (2011). First time I had to reburn the CD because of read-faillures.
My hint: if the update stis stucking (some seconds without the % is running) - interrupt (only by disconnectin battery) and restart with a new medium.

At the second trial all worked fine - Firmware upgraded !
thanks to all
Gerry
Autriche

I had the issue of the update failing. It got to 3/3 and showing 18% in the uppermost part of the display with 3% showing for the bargraph display at the bottom and there it sat. I have a V6 HDi C5 and with 2 batteries in it, I didn't know which one to disconnect. So I drove to the Citroen dealership and explained the problem. There is a large value fuse in the fuseholder section beside the glovebox. It was described to me as a bypass fuse. Pull that out and the Navidrive dies. I had the engine switched on at that point and the car went silly - wipers going, lights on and all sorts of warnings. I was told to switch off the ignition. The dealer then re-inserted the fuse and I restarted the car. The Navidrive still works as it did but without having updated of course. The dealer has ordered me a CD to be delivered this week, free of charge, as the car is still under warranty.

Hope this helps somebody.

[Yavis]

Hi there,

Have updated from SD card without problem on my 2011 C5, from N32b (with 2012/2013 maps from other thread) to N42b.
Used the files from ZippyShare (post #31 on this thread).

Applied the Speedcams update (feb '13) after firmware update and can confirm that POI date is showing up correctly again.

Regards,

[dani.er]

Are you put ISO on root sd? or are you put "unzip" iso on sd card?
thanks and sorry for my english

[alexnf]

When you install this firmware, I will have the following issues:

- Radar Updates doesnt work, or at least only work Citroen/Peugeot signed and original ones?
- Maps Upgrade now need Activation Code?

[AlterKater]

Quick question:

I remember that with the previous FW update that was posted here last year (32.05), some folks reported that after applying it onto their Peugeot NG4, it bootet with a Citroen logo (or vice versa). So it seems that this firmware was for Peugeot (or Citroen?) specifically.

Now when I look at the picture of the original CD that was posted here in this thread earlier, it would look like this CD is for both Peugeot and Citroen, i.e. it should leave the original startup logo untouched.

Can someone confirm that a Peugeot NG4 still boots up with a Peugeot logo after applying this firmware?

TIA!