Which navcore version can I use on my Tomtom one N14644?
* Tomtom One v1: 4N00.001 - 4N00.003
* Tomtom One New Edition: 4N00.004 - 4N00.004.2 => SD card + GPS SirfStar3 receiver
* Tomtom One New Edition: 4N00.012 => SD card + GPS Globallocatte receiver
* Tomtom One New Edition v2: 4N00.006 => internal memory + GPS Globallocatte receiver
* Tomtom One 3rd Edition : 4N01.002 - 4N00.005
* Tomtom One New Edition : 4EE0.001.01
TomTom Go730 + Bootloader 5.5229 + Navcore SE 9485 + Latest UK Map
Garmin Zumo 660LM + Latest Firmware and Maps
Windows Ultimate 7 64bit + OCZ-SSD + i7 2600K @ 4.6 GHz + 2GB Radeon HD 6970 + 8GB DDR3 1600MHz
Do I have this model N14644 TomTom ONE - TomTom ONE New Edition: 4EE0.001.01
I have map 845.2666 DE_AT_CH_and_Eastern_Europe - this is a good map for my gps? Or use the map 845.2645 DE_AT_CH_and_Eastern_Europe?
I do not know who's the best navcore?- who's it good for my gps?
Thank you for your reply.
-combination tested here Bootloader 5.5022+navcore 8410. map 845.2666 DE_AT_CH_and_Eastern_Europe - test runs only a few hours is ok.
Last edited by raw; 20th June 2010 at 18:43.
My mate has a Tomtom ONE (30 Series) TTS* / 125S / 130S - 1GB (4EE0.001.08) running Navcore 8.010, boot 5.5011, GPS 1.21 and a rather old Australian map 720.1868.
I have tried running 855.2884 maps with 9.* patched navcores but the unit fails to boot.
Any clues on which navcore (and therefore which Australian map with IQ) can feasibly run on this unit? According to some of the navcore grids, if I can't update this he is unable to make this Tomtom useful as maps can't be updated.
Thanks for any wisdom
Last edited by castleman; 30th September 2010 at 15:05.
No dice unfortunately.
8.010 did not like 855.2883 at all on the One - refusing to let me use the map despite apparent provision for it it according to Navcore tables.
Turned out well, all updated and much learnt in the process - all good.
Thanks for the support, genuinely appreciated