latest NC prepared for small and large devices

[bmwdriver+]

.. and everything was working as expected, including plugins (namely TTTracklog & Whereami)

TTTracklog works perfectly on my Go730+BestNC.

Starting with NC9 it is impossible/different to popup messages on the screen.
This is mentioned on the homepage of TTTracklog.
AFAIK Event_Logger is the only plugin that does popups on NC9.

I dont know whereami, but it should work similar.

On my Go 730 TTTracklog starts recording from boot automaticly. If you like I could provide the needed configuration (of TTTracklog).

[Harry_C]

TTTracklog works perfectly on my Go730+BestNC.

.../...

On my Go 730 TTTracklog starts recording from boot automaticly. If you like I could provide the needed configuration (of TTTracklog).

Hello

Let me recap,
I have TTuser's NC 9.051 on a GO910 and Drhouse NC 9.103 on a GO730. On both these systems TTTracklog works perfectly, you are right with no popup messages on the screen but with a valid recording of the trace.

With your NC 9.061 there are no popup messages and NO recording .
Now since your patching of NC 9.061 (DSA+) is different for the ones above, I am asking you about your ttsystem especially that if I use the navcore from the CAB file with the Patched 9061 PNDNavigator available in this forum I have files with the trace.

Please post/send your configuration to start TTTracklog from boot automatically keeping in mind that I also use Height from Joghurt

Thanks and Regards,

[bmwdriver+]

I have TTuser's NC 9.051 on a GO910 and Drhouse NC 9.103 on a GO730.

Why?
Compared with my "Best NavCore for Go x30" there is no advantage.
I would also not use a 9.061 on my Go 730.

With your NC 9.061 there are no popup messages and NO recording

Thats defnitely wrong. I just tested it
My NC9.061 + TTTracklog 1.14 works fine.

Please post/send your configuration to start TTTracklog from boot automatically keeping in mind that I also use Height from Joghurt

I'm not interested in Height, but you can just add the needed lines.

To help you I would ask you to do this (maybe again):

use a clean sdcard
+ all files from my 9.061
+ a map
+ TTTracklog 1.14
+ the attached files (overwrite existing files)

[Harry_C]

@ bmwdriver+

"I would also not use a 9.061 on my Go 730."

I agree, I am staying with what I have.

Thanks,

[cocoon]

Hello to all. I tried the NC 9.061. It works fine on my device (tomtom one v3). Now i want to know if i can update the function MAPSHARE and GPSQUICKFIX from tomtom home. sorry for my English. Thanks

[jarkita]

Hello to all. I tried the NC 9.061. It works fine on my device (tomtom one v3). Now i want to know if i can update the function MAPSHARE and GPSQUICKFIX from tomtom home. sorry for my English. Thanks

Of course you can, I'm not sure but ephem (gpsquickfix) folder is empty in downloads, so copy any ephemeris old files over and reconnect home - you will get updates. The same with mapshare just join within menu and you should get mapshare when available.

[Raikard]

First of all, thanks bmwdriver+! You're doing a fantastic job.

I'm using your 9.061 with "oneiq" emu, but I get a 3 panels view. It's possible to change to a 2 panels view in my tomtom one v2 (with SD card and BT)? In my opinion this screen is too small to use this navigation view. But with ~8MB of free ram this is running great!

EDIT: I edited reskin with notepad++, but when my tomtom turns on, the reskin file goes back to x50 emu.

Thanks

[bmwdriver+]

It's possible to change to a 2 panels view in my tomtom one v2 (with SD card and BT)?

You could try mode "x30"
or
NC8.545 (latest NC v8):
How to get maximum available RAM on small devices

[Raikard]

You could try mode "x30"
or
NC8.545 (latest NC v8):
How to get maximum available RAM on small devices

With "x30" I got 3 panels with old menu icons =/

EDIT: Problem solved, I was adding "oneiq" and "bton" to reskin, and bton crashes this config, my mistake =)

Thanks bmwdriver

[Argh.nitrox]

Hi bmwdriver,
I am using your 9.160.567967.2 with a 8.70 Central Europ map with IQ and ALG on my TOMTOM One V1
4,3 Mo RAM left out of 32 Mo
I edited reskin to oneiq
Work OK !
Thank you bmwdriver ! You're THE MAN !!!


Edit: back to 9.061
8,4 Mo left out to 32 Mo
run smoother !