I have Go 930 with Bootloader 5.5120/linux315187/Navcore 8.351
to make this TT up to date and can use map 8.6544 with house number (HNR)
bootloader from 5.5120 to 5.5022
navcore from 8.351 to 9.xxx
update bootloader ...no problem , i will do it soon
update navcore that is the problem i read about some say it work some say no it's work and you must stay with 8.xx , some say it work with navcore 9 se 9 (modified), some say you need to add some patches to navcore 9 to work, some say it work without any mod., some say it work but with porblems like BT or GPS lag ..etc..
can you please if you know well or if you run it on your TT let me know
if Navcore 9.xx work or not , witch version , any problems ? any patch needed ?
and where i can find it if you know.
Yes perfectly working with 9.026 which is the only one working with RDS-TMC free of charge (helpful if you have the correct RDS-TMC antenna, see my post : http://gpsunderground.com/forum/tomt...-antennas.html )
I use this 9.026 for my GO930T
If you are not using RDS-TMC you can upgrade to 9.058 which is working perfectly too.
I am a newbie here and wondered if you could help me. I have a 710 running 9026 nav and 880 maps I have tmc receiver but cannot get it to find a signal it just sits with the green revolving arrow. I have tried with stand alone arial on the unit both inside and outside the car. I have now patched the tip of the arial into the centre core of the car arial but still no signal and no data file grnerated in the gns folder. Does any one have any tips for getting it to work on the 9026 navcore? I have been told I may need to modify the mctx.dat file?
thanks in advance
Oh I am in the UK.