Navcore 8.395 (1913) Work-Truck x10, XL
Version: 8.395 (1913/100308) BS: 342099
Platform: TomTom PNA, Linux
Size: 337 MB
Analog official software, tailored to navigation TomTom GO x10 Series XL (folder "config" and "Outsourced 8.395") works with the cards in the Trucks. The authorization to change function of key parameters of the vehicle. In the late phase of the installation options for setting tone, the ability to activate, visual and audible warning alert "blind alleys"
Last edited by mirek188; 3rd March 2011 at 18:03.
Special 8.395.1913 version for x50 devices
From the 8393 x50 originator (and BiggerDave's quote):Code:http://kxmnmz.link-protector.com
"It is still no perfect but will give you truck features. After the install the Navcore will reboot once - that is normal and can take up to 4 minutes so be patient and don't turn it off.
If the Navcore works on your device you will notice that no Live serves will work (due to the different GPRS module) and that you have to turn the device off using the menu function for it or by holding the power button for 10 sec.
On some devices you have to press the reset button before you can turn them on again."
Please report DEAD LINKS via PM, not by posting in the thread. Thanks
Last edited by jarkita; 13th May 2010 at 17:16.
I have noticed that that Live services do work on my GO950, but the power button does noting except for the soft reset after 15 seconds, which then loses my phone settings, but hats no big issue.
Shame about the power buton, but we cant have it all ways
which would be the version for the x40.
Sorry if this is a dumb question.
Download the rar files at the top of this post and then once uncompressed use the 277mb folder "Navcore 8.395(1913)_Work_Truck_XL" I have it working on my Go 540 Live and its fine running on MicroSD with the map.
Will follow this intructions.
I returned my defective 940 and will receive the replacement tomorrow.
I will post here the results
This Navcore still gives me the error 'file missing' when I run Easyusetools
Last edited by christiank; 10th June 2010 at 13:24.
At what point is it giving this error?
Have you put the .meta & .tmeta into the insert_meta_from_Map_here folder?
Has the meta.txt file in the Progs folder of easyusetools got the Truck codes in it for the .meta & .tmeta?
Are you running easyusetools with your memory card plugged into your pc and telling it which drive letter it is (or your tomtom plugged if you've installed it onto that)?
Also have you got your device id in the txt file as well?
Maybe someone else will know whats wrong I am new to all this.
does I need special maps for truck navcore?
hi can i get this navcore on my tomtom go 720.
kindly regards joca.