Toyota-Lexus GEN5 Nav v11.1 Released on usenet

[ISF]

http://www.binsearch.info/?q=toyota&...e=1100&server=

If you are familiar with usenet you can download it now in less than 3 hours. Enjoy....

here is the nfo file



Toyota.Lexus.North.America.Gen5.Navigation.DVD.Fal l.2011 v11.1
================================================== ============

Here is the North America v11.1 (fall 2011) udate of Toyota/Lexus Gen5 Navigation System

This is compatible with the following Toyota/Lexus Generation 5 Navigation system:

Generation 5 Lexus / Toyota Vehicles:
Lexus:
2007 - 2009: ES350
2007 - 2009: GS350/GS430/GS450h/GS460
2007 - 2009: GX470
2006 - 2009: IS250/IS350
2007 - 2009: RX350
2007 - 2008: RX400h

Toyota:
2006 - 2009: 4 RUNNER
2007 - 2009: CAMRY
2008 - 2009: HIGHLANDER
2008 - 2009: LAND CRUISER
2006- 2009: PRIUS
2008 - 2009: SEQUOIA
2006 - 2009: SIENNA
2007 - 2009: SOLARA
2007 - 2009: TUNDRA


Usage (without Navigation Override):
====================================
1. Simply Extract the Files
2. Burn .iso to DVD-DL disc (use quality disc and suggested to burn at slower speed ie 4x)
3. Insert Disc in to your vehicle (look up online how to eject your navigation disc and insert new one)
4. Enjoy.

NOTE: Do Not put a CD label on. It could heat up and melt off and ruin your Navigation system

If you want to enble the Navigation Override:
=============================================
Read the Dvd_override_hack.txt in the \Dvd_override_hack folder of this release to make a Hybrid 5.1/11.1 disc

[Keks777]

Toyota-Lexus GEN5 Nav v11.1 North America 2011:

Download 2xDVD5:

filepost.com

Toyota-NA-Gen5-2011-v11.1.part1.rar - 4.1 GB

Toyota-NA-Gen5-2011-v11.1.part2.rar - 3.7 GB

[Cool Stinger]

can somebody post the 2 files from the Dvd_override_hack folder (Dvd_override_hack.txt and loadking.kwi)? maybe there are some interesting infos? thx!

[ISF]

Making a Hybrid 5.1/11.1 to allow Navigation Override Hack
----------------------------------------------------------
Navigation Override Allows you to use the Navigation while the car is moving. If you don't care about this, then you can skip this Hack all together.

Here is the downside to this: Gen 5 v8.1+ eliminated the "I agree" screen. If you make a hybrid with a 5.1 loading file, you will regain the override, but you will have to go back to pushing the I agree button on start up.

If you updated you NAVIGATION past v5.1 then you are going to have to reset your navigation - you can find what version your disc is by looking at the version.txt on the your navigation disc, or by trying to override on your vehicle (see below)

To Reset Your your navigation (if your current disc is past v5.1) - You can remove the nav system RADIO 1 fuse for 5 minutes with no disc present in the drive. Then reinsert the fuse, power up the car, and then the nav system should ask for a disc to load the software. Then insert the 5.1 - NOTE: This Reset works on a Lexus, not sure about Toyota. Toyota users might have to look it up online if you can't reset using this method


To override with a hybrid disc:
-------------------------------
On your navigation system in your vehicle
1. Press Menu
2. Press Volume
3. Press Upper left hand corner of screen
4. Press Lower left hand corner of screen
5. Press Upper left hand corner of screen
6. Press Lower left hand corner of screen

You will then have the service menu.
Press and hold the "override" button for about 4 seconds and it will beep.
Press OK.

You need to do this every time you start the car if you want to be able to use the Nav while driving.


Steps on Making a Hybrid Disc to support Navigation Override
------------------------------------------------------------
1. Extract the .iso file (you can use WinRAR)
2. Replace the loading.kwi file from the extracted .iso with the loading.kwi in this folder
3. Write the files to disc (CD Label 464210-1910) - Make sure to use quality DVD-DL media and it is suggested to burn at a slower speed (4x)
4. Put the disc in your car. (look up online how to eject your navigation disc and insert new one)
5. If all is well, you should be able to use the override (above)

NOTE: Do Not put a CD label on. It could heat up and melt off and ruin your Navigation system


More information can be found here - Nav Override Hack - Lexus Owners Club (USA & Canada)
Or you can use google - rumor has it that it is full of information

[juniorz]

thanks for the post. got it from the newsgroups and works good.

[aznracer]

Thanks works! Tried to create a hybrid but it didn't work, unable to read map DVD error...

[ISF]

Thanks works! Tried to create a hybrid but it didn't work, unable to read map DVD error...

First off, you have to downgrade to a v5.1. If you have v6.1 and up then the hybrid disc won't work. If you updated your NAVIGATION past v5.1 then you are going to have to reset your navigation - you can find what version your disc is by looking at the version.txt on the your navigation disc, or by trying to override on your vehicle. To Reset Your your navigation (if your current disc is past v5.1) - You can remove the nav system RADIO 1 fuse for 5 minutes with no disc present in the drive. Then reinsert the fuse, power up the car, and then the nav system should ask for a disc to load the software. Then insert the 5.1 - NOTE: This Reset works on a Lexus, not sure about Toyota. Toyota users might have to look it up online if you can't reset using this method

[aznracer]

Got it working, had to use Isobuster to rip and imgburn to build the image. Thanks!

[wd.hdsk]

thanks for uploader....v11.1 working fine but i would like to make hybrid disk. I created hybrid disk but i can't figure out which fuse i have to remove. Can any one point me in right direction which fuse i have to remove in Lexus ES 350 2008 model?

[messerchmidt]

posting it on the piratebay would be nice, nevertheless, will suffer to get it now