Disc work - two DVD 4,7 GB:
1. DVD - edit image DVD DL and delete alldata.kwi - burn DVD 4,7 GB
2. DVD map - edit image DVD DL and select files map the size 4,7 GB DVD - folder IDX - burn DVD 4,7 GB
Tested on the map E15 Russia 86271-60A110 (PZ445-X03EU-OC). Folder IDX : CZ 01, EST 02, FIN 03, HU 04, LT 05, LV 06, POL 07, ROM 08, RU 09, SK 10
Burn ImgBurn, Verbatim DVD+
Return old map version - disconnecting the battery.
Sorry my english
Last edited by zaniak; 16th September 2012 at 19:55.
which files have to be converted ?
Last week I killed my dvd burner (1616L) :-(
So I bought a new Lite-On 124 iHAS burner.
Next week I'll buy DVD+R DL from Verbatim and will try to burn my image with imgburn (DVD-ROM set).
I also noticed that there is special firmware (extreme pro) available that burns data until the edge of the DVD, size is then 8,7Gb instead of standard 8,5Gb.
Therefor it is necessary to use high quality discs like Verbatim that use quality dy layer until edge of DVD disc.
This extra size is used apparently by Xbox and other game consoles as copy protection since this can detect copied discs.
Should I use this special firmware that makes true full image copies or is the copy protection system of toyota navigation disc not based on this 8,7 GB disc size ?
I think this is my last update.
Just bought my Verbatim DVD+R DL discs and burnt one with imgburn (first setting booktype to DVD-ROM now)
Selected burn speed 2,4x but apparently imgburn changes it back to 4x (the minimal speed for these discs)
After burning it inserted it back in my car, result : checking disc... and the message saying can't read map data
Here is my imgburn log :
ATAPI iHAS124 B AL0S (SATA)
Current Profile: DVD+R DL
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 3.289.648
Size: 6.737.199.104 bytes
Time: 731:03:73 (MM:SS:FF)
MID: MKM-003-00
Supported Write Speeds: 4x; 6x; 8x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1.906.224
Changeable: No
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 3289647)
-> LeadOut (LBA: 3289648)
Disc Control Blocks Information:
ATAPI
Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519
Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519
Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.057.807
Last Physical Sector in Layer 0: 2.102.831
Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.057.807
Last Physical Sector in Layer 0: 2.102.831
Layer Information:
Layer 0 Sectors: 1.906.224 (57,95%)
Layer 1 Sectors: 1.383.424 (42,05%)
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 3289647 (0x0032322F)
-> RS: 16.620 KB/s (12x) - WS: 5.540 KB/s (4x)
Descriptor 2...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 3289647 (0x0032322F)
-> RS: 16.620 KB/s (12x) - WS: 8.310 KB/s (6x)
Descriptor 3...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 3289647 (0x0032322F)
-> RS: 16.620 KB/s (12x) - WS: 11.080 KB/s (8x)
Any options left ?
Maybe change my standard burner firmware to that max firmware ?
Or maybe replacing / editing files on my iso image ? (read something about alldata.kwi or other .kwi files that you have to replace with older versions ?)
Hello,
I'm a new user on Gps Underground, and I get à RX 400H this month. I'm lookink for the last version of system navigator, I think it's the E13. I've found your post, but I've not succeed to load the DVD with the link you've posted.
Doyou want to help me?
Sorry i(ve seen the last version is E15, My question is the same is-there a link to load the DVD Europe Central?
Could You upload North on the another server?
Hi. Did yoy tried to disconnect battery for 10 minutes?
Be sure to have your any original DVD before disconnecting battery.
After connecting battery load your original disc, after system load remove it and load your copy.
It worked fine for me.
Hi. Did yoy tried to disconnect battery for 10 minutes?
Be sure to have your any original DVD before disconnecting battery.
After connecting battery load your original disc, after system load remove it and load your copy.
It worked fine for me.
Does anyone have some advice with burning the ISO image of "PZ445-x03EU-0C" on a DVD+R DL? I heard that setting the booktype to DVD-ROM is very important..... is it going to work on an Auris B9030 navigation device?? (At the moment i have 2010-2011 E12)
BTW, I just checked the website toyota-mapupdates.eu and the latest DVD is now PZ445-x03EU-0D (Update Europe 2012(Q4) DVD).