Toyota GEN5 2009-2010 E12 all 4 DVDs

[gazo]

You probably have not read the first post
These files have already been modified with the E10 loading.kwi

But if you want it seperatelu, just download any of the 4 images

[tartu]

hello guys, sorry my English is a 'little bit raw.
I have a problem I downloaded the DVD (Central Europe E12)
verbatin burned to DVD + DL with ImgBurn at 1x speed as inserted in the navigation of my car, but unfortunately once loaded updated software and set language, etc., on display shows DVD maps are not suitable ...
where I went wrong? can you help me please?

because of the 'attention ... Tartu

[gazo]

Assuming you have burnt a perfect copy, this can only occur if you previously have used an original version E11 in your navi

If that is the case you should disconnect the unit or the battery for about 10 minutes and try again. Then the E10 software will load preventing the PTP/OTP issue that check if your DVD is really an original!

[tartu]

I apologize again for Everlive sent a private message, like a 'help in reference to my browser toyota, my source is dvd version 2006-2007 (but not the original copy) then I installed E11 version (copy) and now the E12 (copy), which I updated the software and now can not No more to read the E11 version but sees only the original version with DVD ... How can I fix this problem please? Now I ask again sorry but I have to google translate from English into Italian and vice versa and do a 'little hard to understand and make myself understood, however, seems to have understood that I must replace the files on this Loading.kwi E10 ... Would you be so kind as to deliver e-mail me this file please ...
thank you very much

[gazo]

You only have to do as explained above or buy an original set at Euro 159

[tartu]

I apologize for my ignorance
No but if I misunderstood the translation I have to disconnect the battery for 10 min and then upload the E10 and E12 put the DVD so everything will work perfectly right? There is a place where I can get the E10?!

Thanks again and then I take the trouble ... Tartu

[gazo]

I am sorry to say that it is getting a bit annoying

You do not need the E10 at any time!

If you would please try to understand what is written here it would make things really much easier

The E12 you download here from this post ALREADY HAS THE E10 FILE
Just disconnect the battery for 10 minutes and put in the downloaded E12 DVD. It will update your system with the E10 software and you will be able to use copied discs

[miszczu1983]

I have tried to burh the images.
I used 2 different DVD+DL (Verbatim AZOx4 and HPx2,4).
I used 2 different burners (TSS SH-S183A and LG which model i can't check now on).
I used IMGBURN with Booktype set to DVD-ROM.
The booktype was succesfuly changed (checked by NERO Disc Info).
However, none of 4 burnt DVD's works (after i reset the navi, the update procedure goes on, and then I have DVD error).
I believe that may be the issue related to burner, If we assume the images are OK (i tried also with image modified by me, with no luck as well).
Can all users who succededin copying please post with which burner did you manage to copy these DVD's?
With TSS SH-S183A I managed to copy Generation 1 DVD (E01).
What may be the reason of no succes with the E12 DVD's?

[gazo]

I can confirm that the images posted work perfectly in an Avensis with Gen 5 TNS700

Liteon LH 201A1S
Asus DRW 20B1ST

Verbatim full Printable DVD+R

The fact that an update is performed as such does not mean that the copy is OK as a navigation DVD

[miszczu1983]

I can confirm that the images posted work perfectly in an Avensis with Gen 5 TNS700

The fact that an update is performed as such does not mean that the copy is OK as a navigation DVD

I am aware of that.
Today I am buying LITEON ihas124.
I will inform about result.
One question - is there any specific reason why are you using printable DVDs except print possibility?