New Firmware 4020/4026/4028/4024 (C6 - C12):

[famoort]

I've upgraded my RNS10 to FW4024 but now my HDD is not recognized anymore. So I have to navigate with a burned DVD. I've already downgraded tp SW 3974 (is it actually downgrading?) without any positive result.
Information:
3T0035680B
HW vehicle 0xC201
H11
SW version 4024

I hope that someone is able to give me a good advice to solve this major problem.

Thanks in advance.

[jomafi]

It seems the HDD ist not correct formatted. This is a problem by using modified pre-released Firmware. Use Josi's HDD-Format SWL-CD to format your HDD. If this will work your HDD is back to life

[DeCiBeL]

HI i have the unit below.

Whats the latest FW i can upgrade to, without coding on VCDS??

[Roksab]

Does someone know VW part number for disk for firmware update?

[ramzes]

Volkswagen RNS 510 Firmware Upgrade



Volkswagen RNS 510 Firmware Upgrade to version 4020 / 4024 / 4026 / 4028
Version 4020/4024/4026/4028 firmware for the Volkswagen RNS 510 and the Skoda Columbus has been released.

Voice Control (requires microphone – see Volkswagen RNS 510 Microphone Connection for voice control)
NEW Faster navigation and user interface
NEW Automatic illumination control
NEW Enhanced destination input
NEW hold down the setup button for 30 seconds and get the following menus: FM, AM and the new VERSION INFO (map version and type, hw and sw versions)
NEW Compass
NEW POI- see Volkswagen RNS 510 Maps POI – New Features with firmware 3xxx
NEW Languages – Arabic, Russian, Turkish and Polish
Speed Limit Display
Stability Improvements
Faster Startup (this has been improved on 2720)
Display OPS and RVC at the same time
SDHC 32 GB Support (HW04 and above)
Display Off on extras tab
Climatronic control if approriate climatronic fitted
Clock display if RNS 510 swtiched off
Excluded roads (under route options)
GPS coordinates entry
Additional adjustments for video
Larger RVC screen with transparent menus at the side
Units that can be upgraded include (still being compiled may not be 100%)

All D and later versions.
1T0 035 680 C (1T0035680 C) from software version 1000, 800, 900, 1100 , 2660 and 2700 to version 3810.
3T0 035 680 A (3T0035680A) to version 2704.
7F0 035 680 (7F0035680) to version 2700.
7E0 035 680 (7E0035680) to version 2700.
Revision B and C units can be upgraded however there may be issues (A units may be upgraded but not recommended).

http://ul.to/it8gl3ao
http://ul.to/lll13xm7

http://egofiles.com/uehemUedwMWnWkaS
http://egofiles.com/wbiIx0nYYCo11Z0g

http://turbobit.net/2odja9b3vas8/4020_nfb.part2.rar.html
http://turbobit.net/ltg5r2betj9s/4020_nfb.part1.rar.html

http://rapidgator.net/file/53972796/4020_nfb.part2.rar.html
http://rapidgator.net/file/53973253/4020_nfb.part1.rar.html

[biff]

Does someone know VW part number for disk for firmware update?

For 1T0 035 680 F units, VW Part Number K00.5001.44.99.

[Lion007]

HI i have the unit below.

Whats the latest FW i can upgrade to, without coding on VCDS??

SW 3890 is a software update.
SW 4020 is a software update
SW 4120 is a firmware update and you must safe and recode after installing

Without redoding


With

[bigbossman]

I've updated to 412x on a skoda columbus, and it requires recoding, if i downgrade to 402x will i still need to recode or will the system recode itself

[jomafi]

The downgrade is no solution to avoid the coding. If the coding is once deleted the device must be recoded. So if you make downgrade its anyway neccessary to recode the device. Now you need a user with VCDS or Setconfig. Otherweise you can drive to VW to recode the device.

[bigbossman]

Thanks Jomafi I was afraid of that, i will have to get it recoded

Thanks again