Firmware RNS-510 4020/4026/4028/4024 for A and later versions
Firmware 4020/4026/4028/4024 for the Volkswagen RNS 510 and the Skoda Columbus
- the modified firmware for revision A and later versions.
Video in Motion and secret menu activated
Voice Control (requires microphone – see Volkswagen RNS 510 Microphone Connection for voice control)
NEW Faster navigation and user interface
NEW Automatic illumination control
NEW Enhanced destination input
NEW hold down the setup button for 30 seconds and get the following menus: FM, AM and the new VERSION INFO (map version and type, hw and sw versions)
NEW POI- see Volkswagen RNS 510 Maps POI – New Features with firmware 3xxx
NEW Languages – Arabic, Russian, Turkish and Polish
Speed Limit Display
Faster Startup (this has been improved on 2720)
Display OPS and RVC at the same time
SDHC 32 GB Support (HW04 and above)
Display Off on extras tab
Climatronic control if approriate climatronic fitted
Clock display if RNS 510 swtiched off
Excluded roads (under route options)
GPS coordinates entry
Additional adjustments for video
Larger RVC screen with transparent menus at the side
Download the files and extract them using winrar and you will have a NRG format ISO file to burn. Using Nero burn a DVD+RW or DVD-R (CDR works as well) at a slow speed (4 x is ok for DVD and 16 x for CD). Make sure you use quality media and keep the burn speed down as low as you can to ensure there are no problems during the installation process.
Warning! This upgrade will not create the new partitions required for the new POI system if you upgrade from 1xxx/2xxx. Upgrading from 3800-3910 is required so the new partitions are created.
Warning! 7L6 Touareg RNS 510′s are no longer supported since version 3810 due to the Touareg being fitted with the RNS 850. Version 1200 was the last version factory loaded on the 7L6 units with a hardware revision B.
Warning! There is a remote chance of you ‘bricking’ the unit, this is a fraction of a percent but it could happen! The process takes around 60 minutes.