I have a small problem. I made unlock my MFD 2 DVD navi (there was f.w. 30), everything is OK, new map 2012 works good too. But if I turn the ignitions off, lock the car and I arrive about 1 hour and 30 minutes later, the NAVI still read from DVD (make noise). Have anybody this problem? Thank you.
VW TOUAREG 2005 with factory fitted MFD 2 DVD.
Last edited by mayday007; 21st August 2012 at 08:08.
Mine baheves the same way. I don't think the NAVI still reads after 1.5 hours but my guess is that when you unlock the car, the Navi gets the info on can-bus and prepares the maps. DVD access and read time are not among the bests, so I suppose the NAVI olny reads data ahead from dvd in order to be ready for navigation sooner. I didn't tried the Navi before unlock, not sure how it behaves. You could try to stay in the car after ignition off, to see if Navi continues to read ...
I've been using the navi for some months but never drained my battery, so I guees it's fine.
If I stay in car nad lock it, the navigation still makes some noise (like laser is still on). If I unlock the car, the navigation self eject the DVD with map. If I put in the navigation CD with AUDIO the problem is still the same, the same situation is if isnt in the navigatoin CD or DVD.
It is very easy reset device.
1. Press Button Radio (sometimes also named band)
2. On the right side press the Button named "Settings" or "Einstellungen"
3. on the left side press the Button "System-Settings" or "System-Einst."
4. Now press on the top-right-side the Button "Factory..." or "Werkseinstellungen"
5. Accept the question with YES and your device will go back to factory settings.
by the way: if you want to see which Firmware is installed do same from point 1 to point 4. to see the device details press the factory-Button longer than 5 sec. Another screen will appear, so you can see the details.