Beta 2760 of the RNS 510 FirmwarePlease note: this is Firmware that has neither been approved of nor been authorized in any other way by Volkswagen.
Most likely this Firmware will only be introduced/released for devices with Index "C" or internal Hardware-generation C6 if at all. There is a good chance it will never be released too.
An installation carries an enormous risk. Do so if you know how to fix your unit in case you got it bricked. It should only be used on C-Devices and can be used on B-Devices.
People with units indexed "A" or without any index should by any means avoid installing this firmware.
New functions have not been introduced so far known today. It merely is a bug fix to the older 2660.
Since this CD comes in the "Update" layout a re-coding of your units after installation will not be required, a loss of data might only occur if you upgrade from below 1100, if you go from anything newer the data in the device will not be erased.
I have tested this Disk without changing it, just the way i got it. The Hidden Menue (a.k.a TestMode) is already activated. It doesn't need to be coded by means of VCDS.
Since my car sat in the Carport while the update was running it took a while to get a satellite-fix afterwards, but apart from that it runs very well and to my full satisfaction. Well done, Continental!
Good luck and have fun with this guys!
this is the Version.txt of the CD:--------------------------------------------
Software Loading CD for CP2 based units
(c) CONTINENTAL Wetzlar
CdTreeBuilder version 3.06 is used.
#CD:P 0 0 4 . 8 7 5 . 3 0 1
#Steckbrief: C_EU_9.242_t520 C6
This is a SWL CD for VW delivery.
#Integrationphase: Delivery cw45/09 C6-samples
the Checksums for the CD: (Checksum-Tool available HERE)CRC32: DF09E8E5
- Format: ISO
- Plattform: RNS510 (VW Navi)
- Language: Multi
- Host: Rapidshare
- Packed size: ~ 330 MB
- Unpacked size: 459 MB
- Password: no Password
Links protected by Linksave. Containers and CNL also available.
Hi, does anyone have firmware 2800???
news for FW3800???
Help please! I have spent days trying to update the firmware but no luck. I have added the V7 maps which work fine. I thought the unit had been updated in February when I had the OEM VW car kit added to the RNS 510. I eventually tried firmware 2660 and this loaded fine. As I want the 7 digit postcodes I have tried 2700, 2720 and 2760. Have tried DVD-R's and CD-R's. Used Alcohol 120, IMGBurn and Ultra ISO. Used the slowest write speeds and tried Sony and Verbatim disks. I either get the 010306 error or a screen saying I have tried to load a previous version - do I want to proceed with update. YOu hot o.k then eventually get the SWP Error again. Unit is in an 09 Passat R36. Details - 1T0035680C, H04, 2660, C_EU_9.242_t300.
Any help would be much appreciated, Thanks
Last edited by gazo; 24th December 2010 at 07:03.
Just tried the 2760 again as not tried it burnt on DVD-R and no luck. Have entered the service and reset the errors. Know the unit is saying (when trying to load 2760) that it is the wrong DVD/CD and error 010104, It says another update was in progress which it wasn't. It ask do you want to continue with new software. Click ok and then the SWL error again 010306. What am I doing wrong?????
Last edited by gazo; 24th December 2010 at 07:03.
One thing is certain, the update should be written to a CD
And since your problem is not a V7 issue, please post in the proper topic and try reading again what has been stated in the first (appropiate) post
Last edited by gazo; 24th December 2010 at 07:04.
All questions should be directed through the forum
Private messages will be disregarded
I keep getting the 010306-error with anything newer than FW2680. I can install the Josi's modded 2760 just fine (the version that works also with A-units) , but not the original. 38xx wont install either. The only solution that I can think of is that my unit is a fake. It has sticker 1T0 035 680 C, HW 11 and also VCDS shows:
Address 37: Navigation (J0506) Labels: 1T0-035-680.clb
Part No SW: 1T0 035 680 C HW: 1T0 035 680 C
Component: RNS-MID H11 2760
but I think some cock has just modified that information and in reality it's just a historical A-version. This unit is bought from ebay (or should I say piratEBAY as there's so much stolen/fake units being sold). I should take a look inside and check if unit's mainboard has some printing that would verify the version.
Modded 2760 is here.
You can find all Josi's modded firmwares in this thread.
Really weird if your unit is original and really a C-unit. You didn't insert the ignition key did you? Just open the doors, turn on RNS and insert SWL disc. It might not update the unit if you have the key inserted.
Did you try to force the SWL update by pressing eject + info + setup (or eject + star button + setup if you have the LED-version of the unit)? This will boot the device into a starting screen that asks for a new SWL CD/DVD. It might say "system is unable to load" or something similar on red labels but that's normal. Just stick the new SWL disc in at this point.
This way you can also downgrade the unit to an older firmware if you wish (otherwise it wont let you install an older firmware).
Last edited by sniiki; 29th December 2010 at 11:39.