Announcement

Collapse
No announcement yet.

Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

    Beta 2760 of the RNS 510 Firmware



    Description:
    Please note: this is Firmware that has neither been approved of nor been authorized in any other way by Volkswagen.
    Most likely this Firmware will only be introduced/released for devices with Index "C" or internal Hardware-generation C6 if at all. There is a good chance it will never be released too.

    An installation carries an enormous risk. Do so if you know how to fix your unit in case you got it bricked. It should only be used on C-Devices and can be used on B-Devices.
    People with units indexed "A" or without any index should by any means avoid installing this firmware.

    New functions have not been introduced so far known today. It merely is a bug fix to the older 2660.
    Since this CD comes in the "Update" layout a re-coding of your units after installation will not be required, a loss of data might only occur if you upgrade from below 1100, if you go from anything newer the data in the device will not be erased.

    I have tested this Disk without changing it, just the way i got it. The Hidden Menue (a.k.a TestMode) is already activated. It doesn't need to be coded by means of VCDS.
    Since my car sat in the Carport while the update was running it took a while to get a satellite-fix afterwards, but apart from that it runs very well and to my full satisfaction. Well done, Continental!
    Good luck and have fun with this guys!

    this is the Version.txt of the CD:
    --------------------------------------------
    Software Loading CD for CP2 based units
    (c) CONTINENTAL Wetzlar


    CdTreeBuilder version 3.06 is used.
    --------------------------------------------



    #CD:P 0 0 4 . 8 7 5 . 3 0 1
    #DATE:2010-01-27

    #Project: VWRNS
    #Author: RoNe
    #Steckbrief: C_EU_9.242_t520 C6

    #CommentStart:
    This is a SWL CD for VW delivery.

    #CommentEnd:


    #Integrationphase: Delivery cw45/09 C6-samples
    #VwSwPartNumber:1T0035680C/1T0035680C/7L6035680C/3T0035680A/7F0035680/7E0035680
    #VwSwIndex:2760/2766/2762/2768/2764
    #AppsBuild:C_EU_9.242_t520 C6



    #CRC16:db1d

    the Checksums for the CD: (Checksum-Tool available HERE)
    CRC32: DF09E8E5
    MD5: F94106641E6693DEE3A8697C69F6E43F
    SHA-1: 7B7EC5382F9872D93712922ABEFA2D1743E5A195
    • Format: ISO
    • Plattform: RNS510 (VW Navi)
    • Language: Multi
    • Host: Rapidshare
    • Packed size: ~ 330 MB
    • Unpacked size: 459 MB
    • Password: no Password


    Links protected by Linksave. Containers and CNL also available.

  • #2
    Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

    Hi, does anyone have firmware 2800???

    Comment


    • #3
      Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

      news for FW3800???

      Comment


      • #4
        Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

        Help please! I have spent days trying to update the firmware but no luck. I have added the V7 maps which work fine. I thought the unit had been updated in February when I had the OEM VW car kit added to the RNS 510. I eventually tried firmware 2660 and this loaded fine. As I want the 7 digit postcodes I have tried 2700, 2720 and 2760. Have tried DVD-R's and CD-R's. Used Alcohol 120, IMGBurn and Ultra ISO. Used the slowest write speeds and tried Sony and Verbatim disks. I either get the 010306 error or a screen saying I have tried to load a previous version - do I want to proceed with update. YOu hot o.k then eventually get the SWP Error again. Unit is in an 09 Passat R36. Details - 1T0035680C, H04, 2660, C_EU_9.242_t300.

        Any help would be much appreciated, Thanks
        Last edited by gazo; 24th December 2010, 08:03.

        Comment


        • #5
          Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

          Just tried the 2760 again as not tried it burnt on DVD-R and no luck. Have entered the service and reset the errors. Know the unit is saying (when trying to load 2760) that it is the wrong DVD/CD and error 010104, It says another update was in progress which it wasn't. It ask do you want to continue with new software. Click ok and then the SWL error again 010306. What am I doing wrong?????
          Last edited by gazo; 24th December 2010, 08:03.

          Comment


          • #6
            Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

            One thing is certain, the update should be written to a CD

            And since your problem is not a V7 issue, please post in the proper topic and try reading again what has been stated in the first (appropiate) post
            Last edited by gazo; 24th December 2010, 08:04.
            All questions should be directed through the forum
            Private messages will be disregarded

            Comment


            • #7
              Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

              Originally posted by gazo View Post
              One thing is certain, the update should be written to a CD

              And since your problem is not a V7 issue, please post in the proper topic and try reading again what has been stated in the first (appropiate) post
              Thanks for taking the time to move my post to the correct thread.

              Comment


              • #8
                Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

                platinum70,
                I keep getting the 010306-error with anything newer than FW2680. I can install the Josi's modded 2760 just fine (the version that works also with A-units) , but not the original. 38xx wont install either. The only solution that I can think of is that my unit is a fake. It has sticker 1T0 035 680 C, HW 11 and also VCDS shows:

                Address 37: Navigation (J0506) Labels: 1T0-035-680.clb
                Part No SW: 1T0 035 680 C HW: 1T0 035 680 C
                Component: RNS-MID H11 2760


                but I think some cock has just modified that information and in reality it's just a historical A-version. This unit is bought from ebay (or should I say piratEBAY as there's so much stolen/fake units being sold). I should take a look inside and check if unit's mainboard has some printing that would verify the version.

                Comment


                • #9
                  Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

                  Originally posted by sniiki View Post
                  platinum70,
                  I keep getting the 010306-error with anything newer than FW2680. I can install the Josi's modded 2760 just fine (the version that works also with A-units) , but not the original. 38xx wont install either. The only solution that I can think of is that my unit is a fake. It has sticker 1T0 035 680 C, HW 11 and also VCDS shows:

                  Address 37: Navigation (J0506) Labels: 1T0-035-680.clb
                  Part No SW: 1T0 035 680 C HW: 1T0 035 680 C
                  Component: RNS-MID H11 2760


                  but I think some cock has just modified that information and in reality it's just a historical A-version. This unit is bought from ebay (or should I say piratEBAY as there's so much stolen/fake units being sold). I should take a look inside and check if unit's mainboard has some printing that would verify the version.
                  Thanks Sniiki.

                  I bought the car new with the unit in from factory so I know that it's a genuine one. I have tried everything, but I have not tried Josi's 2760 one. Only the one from Josi which is 2720 I think. Where did you find that?

                  Comment


                  • #10
                    Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

                    Modded 2760 is here.
                    You can find all Josi's modded firmwares in this thread.

                    Really weird if your unit is original and really a C-unit. You didn't insert the ignition key did you? Just open the doors, turn on RNS and insert SWL disc. It might not update the unit if you have the key inserted.

                    Did you try to force the SWL update by pressing eject + info + setup (or eject + star button + setup if you have the LED-version of the unit)? This will boot the device into a starting screen that asks for a new SWL CD/DVD. It might say "system is unable to load" or something similar on red labels but that's normal. Just stick the new SWL disc in at this point.
                    This way you can also downgrade the unit to an older firmware if you wish (otherwise it wont let you install an older firmware).
                    Last edited by sniiki; 29th December 2010, 12:39.

                    Comment


                    • #11
                      Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

                      Hi there,

                      My RNS is a B version wich is installed after i bought the car. It is re-coded for the powerdrain issue and the MFSW has been enabled. I can't get the dash GPS directions to work because of the firmware i think.

                      Altough it is in the description in the first post i like to verify that i won't have to recode the MFSW and powerdrain things after this update since i had someone do it for me.

                      Hoping for a positive answer.

                      Greets,

                      Thomas.

                      Comment


                      • #12
                        Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

                        Would you like to share the meaning of MFSW?

                        If you want directions in the instrumentcluster you need the large display to start with and not all models have that
                        All questions should be directed through the forum
                        Private messages will be disregarded

                        Comment


                        • #13
                          Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

                          Hi gazo,

                          I have the big screen in the instrumentcluster but thought that the fwversion was holding it back. MFSW is the multi functional steering wheel, so with the buttons on it. They all work now but i don't want the update make me recode everything and notice that the battery is dead the next morning

                          Greets,

                          Thomas.

                          Comment


                          • #14
                            Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

                            The display should function regardless of the FW version but is does require coding
                            All questions should be directed through the forum
                            Private messages will be disregarded

                            Comment


                            • #15
                              Re: Volkswagen RNS 510 Beta Firmware version 2760 / 2762 / 2764 / 2766 / 2768

                              Originally posted by abbixx View Post
                              Power drain issue is not related to the coding, but to the CAN gateway version and firmware version.
                              There are numerous firms that successfully program the system/gateway to address the powerdrain issue
                              Last edited by gazo; 15th September 2011, 21:41.

                              Comment

                              Working...
                              X