Garmin jnx file format hacking

[jagmagana]

Re: Garmin jnx file format hacking

Oregon 450, Firmware 6.0 .... work OK with the last patcher version.

The only problem (firmware problem) is the tempe sensor, ... display the temperature OK but is not registered in the track (current.gpx).

This problem (already in the 5.90) was theoretically resolved in this version ... but still fails

[iogrea]

Re: Garmin jnx file format hacking

Thanks a lot White. Great work!
Dakota 5.50 succesfully patched. All ok.

[WHITEDRAG0N]

Re: Garmin jnx file format hacking

HI, Its been a while and i havent been active for a few months.

But have just got back into playing with JNX files.

It looks like JNX files are not only limited by tiles but files size too. I have managed to create a 8GB file but my garmin will not accept it.

Its all down the the files system FAT32. It only allows 4gb files.

Please can the MOBAT2JNX tool be updated to allow for this.

Whiter it might also be worth noting this in you discription of the format.

Cheer

Whitedrag0n

[kiozen]

Re: Garmin jnx file format hacking

Next to the FAT32 file system, the JNX format itself limits it's size to 4GB as the offset into the file for the single tiles is 32bit only. But as you can have several files with the same product ID you can easily bypass this limitation.

[WHITEDRAG0N]

Re: Garmin jnx file format hacking

I thought there was somthing else going on. Looks like i will have to split the file by amount of tiles. Not total file size. If i half the tike count the fike size shouls approximatly half

[haute]

Re: Garmin jnx file format hacking

Processing file D:\Garmin\Firmwares\Etrex 20_30\eTrex20_30_287Beta.GCD

Firmware version as specified in GCD file: 2.87 for Etrex 20/30.
Firmware name: Beta Software 2.87 for Etrex 20/30.

Pattern not found.
Please visit
Firmware versions supported by the patcher
to check if the latest version of the patcher supports your firmware.

[haute]

Re: Garmin jnx file format hacking

Patch etrex 20to30

FIRMWARE 2.87 Beta (offset Fw_all.bin)

OLD NEW
10A546: 18 40
10A547: 70 1C
10A549: 78 70

FIRMWARE 2.87 Beta (offset *.gcd)

OLD NEW
18C7F1: 18 40
18C7F2: 70 1C
18C7F4: 78 70

[haute]

Re: Garmin jnx file format hacking

leave a link for you to try with the last two versions of firmware 2.87 Beta eTREX20-30
- Patched version JNX
- Patched version JNX + 20to30.

https://docs.google.com/open?id=0B8S...jFGWEN3cm1ydm8

If someone can try to communicate results.
A greeting.

[Whiter]

Re: Garmin jnx file format hacking

The patcher is updated to 2.13.
Recognition of Alpha 100 firmwares added, as well as support of the latest FW version 2.87 for eTrex 20/30.

The archive is available here.

[haute]

Re: Garmin jnx file format hacking

The patcher is updated to 2.13.
Recognition of Alpha 100 firmwares added, as well as support of the latest FW version 2.87 for eTrex 20/30.

The archive is available here.

hi Whiter,
The last byte of firmware, is any checksum?

[haute]

Re: Garmin jnx file format hacking

The patcher is updated to 2.13.
Recognition of Alpha 100 firmwares added, as well as support of the latest FW version 2.87 for eTrex 20/30.

The archive is available here.

hi Whiter,
The last byte of firmware, because you change it? is any checksum?

[Whiter]

Re: Garmin jnx file format hacking

The last byte of firmware, because you change it? is any checksum?

Yes. The sum of all bytes in fw_all.bin should be equal to zero. It's adjusted with help of the last byte.

[sergio2]

Re: Garmin jnx file format hacking

Hi,

I make .jnx files with MOBAC and MOBAC2JNX.
But when .jnx is up to 2 Gb, JNX Customizer can't load the heavy .jnx so that I can't achieve zoom levels.
Is there a way to modify JNX Customizer ? What can I sort out this problem ?

[mimichris]

Re: Garmin jnx file format hacking

The last firmware for Dakota 20, 5.50, is OK for patcher. It can read JNX done with Mapc2mapc

[jagmagana]

Re: Garmin jnx file format hacking

Hi,

I make .jnx files with MOBAC and MOBAC2JNX.
But when .jnx is up to 2 Gb, JNX Customizer can't load the heavy .jnx so that I can't achieve zoom levels.
Is there a way to modify JNX Customizer ? What can I sort out this problem ?

Hello, I am the author of Jnx Customizer. Please, send me a link or similar (private message) to download a problematic heavy jnx file and try to fix the problem.

Thanks!