Announcement

Collapse
No announcement yet.

How to install and create a map with Original Mapsource Locked

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to install and create a map with Original Mapsource Locked

    For a Mapsource installation you have to start with the Original IMG Folder

    Attention
    From 2012.30 Version Mapsource is not anymaore integrated in Map installation files, Update.MSI will install only BaseCamp, so you need to install Mapsource alone then run Update.MSI file.
    Mapsource is not anymore supported by Garmin, version 6.16.3 is the last one.


    1.1)Run the Update MSI file to install new map in Mapsource.


    1.2)If you have downloaded a XXXXXXXXX.gmap FOLDER
    In some post will find ONLY the gmap Folder EXP."City Navigator Europe NT 2012.30.gmap"
    In this cases you just have to copy this folder in:
    (in XP - C:\Documents and Settings\All Users\Application Data\GARMIN\Maps)
    (in Vista, Windows 7 - C:\ProgramData\Garmin\Maps)
    OR
    (in Vista, Windows 7 - C:\Users\USER\AppData\Roaming\GARMIN)
    where "USER" is your windows account


    2)Once you will need a Patched Mapsource.exe to have the possibility to unlock the map in mapsource and Jetmouse 1.5

    Mapsource.exe Patched (replace the original EXE)
    Mapsource.exe Patched See Attached file on post

    Jetmouse 1.5 (some Antivir will advise you buti s a “false positive” create a rule for the folder with Jetmouse this way you can use it without Antivirus block)
    Jetmouse 1.5 See Attached file on post

    3)Run Mapsource and you will find the map Locked



    4)Chose Unlock Maps and you will see the Map Product Manager - Unlock Regions,
    can use Utilities\Manage Map Products... and you will have the same result



    5)You have to click "ADD..."
    Then run Jetmouse 1.5 enter your Device ID and click to Select Map Product "costum mapset" enter map ID CN 2011.40 = 2365 and click "Generate"



    6)Copy your unlock code and paste it in Add Unlock Region



    7)Click OK and restart Mapsource.
    You will find the map unlocked, if you have more maps you will see the maps listed in Mapsource. Choose the one you want to use.
    If you don't find the map in mapsource select it manualy in View\Switch To Product and select the new instaled Mapset.





    8)Using Map Tool you can select all the groups of maps you need for your personal map.
    You can send maps in Your Device if no GMA protection is used and the map will be unlocked, or send in your Drive to unlock with your prefered Unlocker.
    Attached Files
    Last edited by Kor@l; 17th October 2012, 20:43.
    www.iptvthebest.net

  • #2
    Re: How to install and create a map with Original Mapsource Locked

    Hi Kor@l, I am stuck on after step 7. As I cannot see anywhere the maps in mapsource. I am trying it on europe 2012.10 maps.
    Last edited by cynosure1023; 23rd May 2011, 18:31.

    Comment


    • #3
      Re: How to install and create a map with Original Mapsource Locked

      You can find it in your device or using mapsource

      Using mapsource
      YouTube - ‪How to get Unit ID number on Garmin units‬‏

      Or you have to look in Tools\Setting \Info or about in XT
      www.iptvthebest.net

      Comment


      • #4
        Re: How to install and create a map with Original Mapsource Locked

        Hi Kor@l, I was able to get the device id. thanks but now I am stuck on after step 7. As I cannot see anywhere the maps in mapsource. I am trying it on europe 2012.10 maps.

        Comment


        • #5
          Re: How to install and create a map with Original Mapsource Locked

          Have you already unlocked the map??
          www.iptvthebest.net

          Comment


          • #6
            Re: How to install and create a map with Original Mapsource Locked

            I copied the unlock code and paste it in Add Unlock Region and Click OK and restart Mapsource. Now the way you showed in your screenshot i cant find the map unlocked in mapsource

            Comment


            • #7
              Re: How to install and create a map with Original Mapsource Locked

              The CN Europe 2012.10 is not listed?? Or is still locked?
              www.iptvthebest.net

              Comment


              • #8
                Re: How to install and create a map with Original Mapsource Locked

                The CN Europe 2012.10 is not listed

                Comment


                • #9
                  Re: How to install and create a map with Original Mapsource Locked

                  have you seen in View\Switch to Product and select: City Navigator Europe NT 2012.1
                  www.iptvthebest.net

                  Comment


                  • #10
                    Re: How to install and create a map with Original Mapsource Locked

                    Yes its there and a tick beside it.

                    Comment


                    • #11
                      Re: How to install and create a map with Original Mapsource Locked

                      I dont know wat's wrong you must se the map in mapsource and select it, never have this problem with a lot of installation
                      www.iptvthebest.net

                      Comment


                      • #12
                        Re: How to install and create a map with Original Mapsource Locked

                        Originally posted by Kor@l View Post
                        I dont know wat's wrong you must se the map in mapsource and select it, never have this problem with a lot of installation
                        I'm having the same problem. I can see the map preview on the right panel, BUT I can't select it to send to my device.

                        Comment


                        • #13
                          Re: How to install and create a map with Original Mapsource Locked

                          I am having a problem of Mapsource locking up (on two other computers) after installing CNNANT 2012.10.

                          I have a NuMap Lifetime update for my Nuvi. It took the update with no problems. I told it to install on both my computer and my Nuvi. After the installation was complete and working, I replaced Mapsource.exe with patched version 6.15.11 Mapsource.exe. Everything works fine, and was able to unlock & install on my 60CSx.

                          Problems started when I tried to replace 2011.4 with 2012.10 on my laptop and other tower computer. 2011.4 was already working perfectly on both other computers. All computers are running Windows XP Pro edition. I copied all of the files from the 2012.1 installation (gmap folder, etc.) to a dvd.

                          On both other computers, I ran the .msi file from the dvd, and it said that 2012.10 was installed successfully. I replaced Mapsource.exe with the same patched version 6.15.11. I also copied the gma and unl files to the new computers. When I start Mapsource, it comes up fine, and CNNA 2012.1 is fully available, unlocked and ready. I can zoom in or out, move all over the maps with no problems. I can load a waypoint file and see all of the waypoints on the 2012 map ok.

                          Everything is fine until I try to select ANY map segment. Mapsource instantly opens an error box saying, "There is a problem with this Garmin application." It wants me to click on a button to copy to the clipboard, and send to Garmin. I cannot click on anything. Mouse still works, and the only way to get out is to use Windows Task Manager and End Task. This happened on both other computers, but the exact same version of Mapsource is still working perfectly on the computer which took the origional download from Garmin. On both other computers, I tried going back to the Mapsource that was installed with the 2012 update, but I get the same error.

                          Has anyone else tried to install 2012.1 on another computer and run into this problem? Perhaps a registry entry was made on the computer during the Garmin download that is not being included in the install on another computer? Perhaps I should try downloading the 2012.1 update to the new computer, installing only on the computer?

                          Any thoughts?

                          Thanks,

                          Harold
                          Last edited by Harold2689; 27th May 2011, 13:52.

                          Comment


                          • #14
                            Re: How to install and create a map with Original Mapsource Locked

                            hi

                            about 4 step.
                            I have no maps in Unlock Regions tab?

                            how to do that
                            ????
                            Seb

                            Comment


                            • #15
                              Re: How to install and create a map with Original Mapsource Locked

                              @ Harold2689
                              It look like a software problem, maybe you have to use the Mapsource.EXE V6.16.3 not the 6.15.11.

                              Sebo_
                              Don't warry, even if you dont see the map listed you have to Add it with the generated unlock code, the map will be present than in the list.
                              www.iptvthebest.net

                              Comment

                              Working...
                              X