Announcement

Collapse
No announcement yet.

*.ov2 file format??

Collapse
This topic is closed.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • *.ov2 file format??

    I am having issues with the .ov2 tomtom files

    What i find is i can convert using many programs garmin's GPX, GPI, etx POI files
    to tomtom ov2 and they work fine on the tomtom

    What i am finding is when i flick around the various websites for updated POI files for TOMTOM and i download the ov2 files that i can't read some of them them with any of the programs i have, I just keep getting file unable to load or read etc.

    I use GPSBabelGUI, ExpertGPS, PoiEdit, GPS Utility, Extra POI Editor, GPSU File Converter
    and none of these will read some ov2 files
    is there a program that will read these files other than the above

    See if i want to convert some ov2 files i downlown to garmin i can't seem to read some of the ov2 files i find
    but they do work on the tomtoms when i copy them over to the gps

    i'm at a loss as to why some i can read and some i can't do anything with

    any ideas?

  • #2
    Re: *.ov2 file format??

    Where did you download the POIs from? Was it POI Plaza? > I heard some of the ov2 files there are corrupted. They have several formats there and hopefully they won't all be corrupted so you can use your conversion programs.
    TomTom Tutorials & FAQ
    TomTom GO 730, Navcore 9.051c, 64Mb RAM, Australia 910.4892, Bootloader: 5.5250
    TomTom ONE v1, Navcore 9.170SE, 32Mb RAM, Australia 910.4892, Bootloader: 5.5244

    Comment


    • #3
      Re: *.ov2 file format??

      So, why don't you get the OV2tools? Long time ago (2008) I have downloaded the file OV2TOOLS.ZIP with 2 files inside: DUMPOV2.EXE and MAKEOV2.EXE.

      accordingly to this site below:

      h**p://www.dotsis.com/mobile_phone/map-gps-guide-tools/37520-poi-speedradar-controlpoints-poland.html

      The first tool, MAKEOV2, can be used to convert a simple text file containing the coordinates and names of locations into a ready-to-use OV2 file.
      The second tool, DUMPOV2, can dump the content of POI databases into text format (yes, text that can be used by the MAKEOV2 tool).

      The use of DUMPOV2.EXE is simple and straightforward:

      DUMPOV2 [inputfilename] [outputfilename]

      Where "inputfilename" must be a valid TomTom Navigator POI file (with extension OV2) or a valid Route Planner or Citymaps OVERLAY file (with extension OVR). It is recommended to provide an outputfilename with extension ASC. If you do not specify any parameters, all OV2 and OVR files in the current directory will be converted (but existing ASC files will not be overwritten).

      The use of MAKEOV2.EXE is as follows:

      MAKEOV2 inputfilename [outputfilename]

      The input file should be a text file (extension ASC is recommended) that should simply contain lines of text. Any line starting with a semi-colon will be ignored. Empty lines will also be ignored. All other lines are expected to represent points of interest. Such a line should specify a longitude, a latitude and a name, seperated by commas. It is recommended that the name is put between double quotes. A name should not contain double quotes. Longitudes and latitudes may be specified either as degrees and fractions of degrees, or in degrees, minutes and seconds. Both colons and single-quote/double-quote notation may be used for minutes and seconds. So, all the following lines are all equivalent:

      53.5 , 4 , "Truckers Restaurant La Bamba"
      53.5000000 , 4.00000000 , "Truckers Restaurant La Bamba"
      53'30"00 , 4'00"00 , "Truckers Restaurant La Bamba"
      53'30 , 4'0 , "Truckers Restaurant La Bamba"
      53:30:0 , 4 , "Truckers Restaurant La Bamba"

      I found a link to it at this website:

      h**p://www.grampianrepeatergroup.co.uk/gps/ov2tools.zip

      Fred

      Comment


      • #4
        Re: *.ov2 file format??

        Originally posted by fporto View Post
        So, why don't you get the OV2tools? Long time ago (2008) I have downloaded the file OV2TOOLS.ZIP with 2 files inside: DUMPOV2.EXE and MAKEOV2.EXE.

        accordingly to this site below:

        h**p://www.dotsis.com/mobile_phone/map-gps-guide-tools/37520-poi-speedradar-controlpoints-poland.html

        The first tool, MAKEOV2, can be used to convert a simple text file containing the coordinates and names of locations into a ready-to-use OV2 file.
        The second tool, DUMPOV2, can dump the content of POI databases into text format (yes, text that can be used by the MAKEOV2 tool).

        The use of DUMPOV2.EXE is simple and straightforward:

        DUMPOV2 [inputfilename] [outputfilename]

        Where "inputfilename" must be a valid TomTom Navigator POI file (with extension OV2) or a valid Route Planner or Citymaps OVERLAY file (with extension OVR). It is recommended to provide an outputfilename with extension ASC. If you do not specify any parameters, all OV2 and OVR files in the current directory will be converted (but existing ASC files will not be overwritten).

        The use of MAKEOV2.EXE is as follows:

        MAKEOV2 inputfilename [outputfilename]

        The input file should be a text file (extension ASC is recommended) that should simply contain lines of text. Any line starting with a semi-colon will be ignored. Empty lines will also be ignored. All other lines are expected to represent points of interest. Such a line should specify a longitude, a latitude and a name, seperated by commas. It is recommended that the name is put between double quotes. A name should not contain double quotes. Longitudes and latitudes may be specified either as degrees and fractions of degrees, or in degrees, minutes and seconds. Both colons and single-quote/double-quote notation may be used for minutes and seconds. So, all the following lines are all equivalent:

        53.5 , 4 , "Truckers Restaurant La Bamba"
        53.5000000 , 4.00000000 , "Truckers Restaurant La Bamba"
        53'30"00 , 4'00"00 , "Truckers Restaurant La Bamba"
        53'30 , 4'0 , "Truckers Restaurant La Bamba"
        53:30:0 , 4 , "Truckers Restaurant La Bamba"

        I found a link to it at this website:

        h**p://www.grampianrepeatergroup.co.uk/gps/ov2tools.zip

        Fred
        Well that worked a charm many thanks
        i can now read those files

        Originally posted by hulio View Post
        I am having issues with the .ov2 tomtom files

        What i find is i can convert using many programs garmin's GPX, GPI, etx POI files
        to tomtom ov2 and they work fine on the tomtom

        What i am finding is when i flick around the various websites for updated POI files for TOMTOM and i download the ov2 files that i can't read some of them them with any of the programs i have, I just keep getting file unable to load or read etc.

        I use GPSBabelGUI, ExpertGPS, PoiEdit, GPS Utility, Extra POI Editor, GPSU File Converter
        and none of these will read some ov2 files
        is there a program that will read these files other than the above

        See if i want to convert some ov2 files i downlown to garmin i can't seem to read some of the ov2 files i find
        but they do work on the tomtoms when i copy them over to the gps

        i'm at a loss as to why some i can read and some i can't do anything with

        any ideas?
        Yes some were from there but not all
        some from around the web in general

        Comment


        • #5
          Re: *.ov2 file format??

          Originally posted by hulio View Post
          I am having issues with the .ov2 tomtom files

          I use GPSBabelGUI, ExpertGPS, PoiEdit, GPS Utility, Extra POI Editor, GPSU File Converter
          and none of these will read some ov2 files
          is there a program that will read these files other than the above
          If you have an issue with Extra_POI_Editor, just point me to an OV2 file and I'll correct the problem. This could be a type 64, but I can manage.

          Turbo (author of Extra_POI_Editor)

          Comment


          • #6
            Re: *.ov2 file format??

            Originally posted by turboccc View Post
            If you have an issue with Extra_POI_Editor, just point me to an OV2 file and I'll correct the problem. This could be a type 64, but I can manage.

            Turbo (author of Extra_POI_Editor)
            here is 2 POI i can't view or edit
            I have not much of a chance to goes thru my folders
            but i know these 2 were giving me problems
            with your program
            Attached Files

            Comment


            • #7
              Re: *.ov2 file format??

              Ok. Just got the files. I was not configured to receive notifications for this thread.. I will have a look.

              Comment


              • #8
                Re: *.ov2 file format??

                This is a type-3 OV2 file. It seems there is one more field information. Tell me what it is:

                In the wifi file, the first POI has 3 fields:
                1-lon/lat coordinates
                2-a poi name: "WiFi HotSpot"
                3-a description? : AUS-Down Town Milk Bar

                I need to know what I should do with the third field when importing to EPE. Add it to the POI Name? Put it in the description field? Something else?

                Turbo

                Comment


                • #9
                  Re: *.ov2 file format??

                  The OV2 type 3 seems to allow more than one line in a POI name. The character "\000" (zero) seems to indicate a line break which would lead me to conclude the additional information should be appended to the POI name. Not sure how this would display on a Garmin. If I put the extra info in a different field, it will also be difficult to save it back to OV2 while preserving the same format.

                  Again. Let me know.

                  Turbo

                  Comment


                  • #10
                    Re: *.ov2 file format??

                    In the meantime, I posted a version of EPE v4.84 which will append all information found in OV2 type 3 in the POI name. You can find it here:

                    EPE v4.84

                    Comment

                    Working...
                    X