Announcement

Collapse
No announcement yet.

[solved] Tom Tom truck help

Collapse
This topic is closed.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [solved] Tom Tom truck help

    Hi all. I'm new to all this so please bear with me, am I right in thinking that you can install tom tom truck on to an SD card which I would prefer, or does it have to be installed direct to my tom tom unit which is a one XL?
    If this is possible, any help and advice would be appriated.

  • #2
    Re: Tom Tom truck help

    Originally posted by huw282 View Post
    Hi all. I'm new to all this so please bear with me, am I right in thinking that you can install tom tom truck on to an SD card which I would prefer, or does it have to be installed direct to my tom tom unit which is a one XL?
    If this is possible, any help and advice would be appriated.
    You need to have +2GB disk capacity to full install. So leave internal memory "as is" and install truck navcore 8.395 and map 840.2554 to a SD. TT will read SD when inserted.
    rgds jarkita
    TT Onev1, 9.430 by bmwdriver, 900.4602-> UK&RoI, Europe; 895.4438 -> PL.
    No support over PM - check Tomtom Tutorials Section and ask within forums.
    Biggest lie in the inernet: I searched but did not find.

    Comment


    • #3
      Re: Tom Tom truck help

      Thanks for that. Where would I find truck navcore8.395 and map 840.2554, and is it easy to install on the SD card?
      Thanks

      Comment


      • #4
        Re: Tom Tom truck help

        Originally posted by huw282 View Post
        Thanks for that. Where would I find truck navcore8.395 and map 840.2554, and is it easy to install on the SD card?
        Thanks
        Map http://gpsunderground.com/forum/show...0.2554-1.96-GB)
        Navcore http://gpsunderground.com/forum/show...k-Truck-x10-XL
        Just follow the steps from here http://gpsunderground.com/forum/show...vcore-and-maps
        PS. You need to create 2 .dct files so use Easyusetools or Tomtom Keygen from here http://gpsunderground.com/forum/foru...ols-amp-Tweaks
        rgds jarkita
        TT Onev1, 9.430 by bmwdriver, 900.4602-> UK&RoI, Europe; 895.4438 -> PL.
        No support over PM - check Tomtom Tutorials Section and ask within forums.
        Biggest lie in the inernet: I searched but did not find.

        Comment


        • #5
          Re: Tom Tom truck help

          Hi all, I am new to GPSUnderground and I have so far found it very informative.

          My question is:

          I have just ordered the TT GO950 and should be with me in a few days, will the above instructions work for it to convert into a TT Truck, maybe apart from a different navcore?

          Many thanks fir the great site and any answers given.

          Comment


          • #6
            Re: Tom Tom truck help

            Originally posted by jollyware View Post
            Hi all, I am new to GPSUnderground and I have so far found it very informative.
            My question is:
            I have just ordered the TT GO950 and should be with me in a few days, will the above instructions work for it to convert into a TT Truck, maybe apart from a different navcore?
            Many thanks fir the great site and any answers given.
            Truck set is truck navcore + truck map, no other option will work properly ... I'm afraid TTGOx50 series have no good opinion in case of truck conversion, they work but with some bugs ...
            rgds jarkita
            TT Onev1, 9.430 by bmwdriver, 900.4602-> UK&RoI, Europe; 895.4438 -> PL.
            No support over PM - check Tomtom Tutorials Section and ask within forums.
            Biggest lie in the inernet: I searched but did not find.

            Comment


            • #7
              Re: Tom Tom truck help

              Do you know what the bugs are, I have only seen that the live services don't work.

              Comment


              • #8
                Re: Tom Tom truck help

                You need to use a special edition ttsystem file and after install the Navcore tt will reboot once - that is normal and can take up to 4 minutes so be patient and don't turn it off. If the Navcore works on your device you will notice that no Live serves will work (due to the different GPRS module) and that you have to turn the device off using the menu function for it or by holding the power button for 10 sec. On some devices you have to press the reset button before you can turn them on again.
                rgds jarkita
                TT Onev1, 9.430 by bmwdriver, 900.4602-> UK&RoI, Europe; 895.4438 -> PL.
                No support over PM - check Tomtom Tutorials Section and ask within forums.
                Biggest lie in the inernet: I searched but did not find.

                Comment


                • #9
                  Re: Tom Tom truck help

                  Originally posted by jarkita View Post
                  The links just helped another newbie here. Thanks!

                  Comment


                  • #10
                    Re: Tom Tom truck help

                    As mention above you need to create 2 .dct files one for .meta and one for .tmeta

                    i ve created the .dct for the .meta
                    but i cant create the .dct file for .tmeta
                    im using easyusetool to create the files
                    is the another way to do is

                    Thanks in advance for your help

                    Comment


                    • #11
                      Re: Tom Tom truck help

                      Did you put your files "Europe_Truck-109.meta" and "Europe_Truck-109.tmeta" in the "insert meta from map here" folder?
                      Is your meta.txt file up to date? That means that the meta-codes for both files are in it?

                      Comment


                      • #12
                        Re: [moved] Tom Tom truck help

                        Drop both the original meta.dct and tmeta.dct into Easyusetools and it will generate both files for you.

                        Comment


                        • #13
                          Re: Tom Tom truck help

                          Originally posted by sparky312002 View Post
                          As mention above you need to create 2 .dct files one for .meta and one for .tmeta

                          i ve created the .dct for the .meta
                          but i cant create the .dct file for .tmeta
                          im using easyusetool to create the files
                          is the another way to do is

                          Thanks in advance for your help
                          you can use keygen 2010 4.1D that is a more friendly and has simple to use interface. a 4gb sd card would be more beneficial as the truck map is larger than 2gb. if you only have 2gb card you can delete some files to make it fit. but you will loose certain features.

                          Comment


                          • #14
                            Re: [moved] Tom Tom truck help

                            Thanks all for ur help use keygen 2010 and that sorted the problem.
                            Thanks

                            Comment


                            • #15
                              Re: [moved] Tom Tom truck help

                              Originally posted by sparky312002 View Post
                              Thanks all for ur help use keygen 2010 and that sorted the problem.
                              Thanks
                              nice one glad we helped

                              Comment

                              Working...
                              X