Announcement

Collapse
No announcement yet.

Tom Tom Navigator and WinCE 6.0

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tom Tom Navigator and WinCE 6.0

    Hello,

    I've recently got a Chinese GPS that has WinCE6.0 on it. They upgraded the software since the last one.
    I had TT7 working fine on WinCE 5 but I can't seem to get it going with 6.0
    I get this error

    Unable to Start
    No enough memory is available

    Its a 64mb, the hardware should be fine to run it. I've read other forums where people have had trouble, but I can't seem to find a workable solution. IGO8 works fine on it, but i really want to get tomtom working. If this has been discussed and solved, could you please post a link? I've tried searching here for 30 mins but can't find any discussion on this specific issue.

    cheers.

  • #2
    Re: Tom Tom Navigator and WinCE 6.0

    Hi,guy, Try to use the TT7 from this link.

    I have succeeded to install TT7 on PNA with Wince 6.0 (Apical,128M Ram) after i tried to start TT7 hundreds of times with different.

    This is the only one get my PNA working perfectly.

    Some advise to you.

    1. The most inportant is to modifiy the script correctly to copy the Mappsetting which come from same version of map and contained a planned A-to-B route.
    Each time when you start TT7, your last saved mapsetting will be overwriten by this one.

    2.Make sure the map you are using is compatiable with PNA with TT7.45

    3. use TT7keygenerate to crack your map for wince 6.0 device, but TT8 keygenerate for your Wince 5.0 device. I found this when i was using TT7.9 installed on Wince 5.o Emulator to get the mappsetting file.

    4. there is a place to specify the programme memory for TT7 in the script. Try different value to match your device. When you start TT7 from the GPS interface (NOt Wince 6 directly), you have to decrease the value if you got "Not enough memory .....". That's because the GPS interface application is trying to allocate memory for itself. (I am just guessing)

    Good luck to you.

    Comment


    • #3
      Re: Tom Tom Navigator and WinCE 6.0

      Originally posted by Jim1979 View Post
      Hi,guy, Try to use the TT7 from this link.

      I have succeeded to install TT7 on PNA with Wince 6.0 (Apical,128M Ram) after i tried to start TT7 hundreds of times with different.

      This is the only one get my PNA working perfectly.

      Some advise to you.

      1. The most inportant is to modifiy the script correctly to copy the Mappsetting which come from same version of map and contained a planned A-to-B route.
      Each time when you start TT7, your last saved mapsetting will be overwriten by this one.

      2.Make sure the map you are using is compatiable with PNA with TT7.45

      3. use TT7keygenerate to crack your map for wince 6.0 device, but TT8 keygenerate for your Wince 5.0 device. I found this when i was using TT7.9 installed on Wince 5.o Emulator to get the mappsetting file.

      4. there is a place to specify the programme memory for TT7 in the script. Try different value to match your device. When you start TT7 from the GPS interface (NOt Wince 6 directly), you have to decrease the value if you got "Not enough memory .....". That's because the GPS interface application is trying to allocate memory for itself. (I am just guessing)

      Good luck to you.



      hi, could you please tell me how to install tomtom nav 7 and maps..
      i have tryed every thing and i still cant do it. i have a china double din head unit and its
      wince 6. i have managed to install tomtom nav 6 and it works fine but its not up to date.
      i downloaded tomtom nav 7 and put the files on a micro sd card and put it in the head unit, it loads up tomtom nav 7 but says no maps found. i have tryed soo many things and now i need expert help.

      i have deleted all the tomtom files and maps as i think they did not match, so could you please tell me where to get the right tomtom nav 7 and the right map to go with it, i would like UK & Irland or Westen Europe.

      also a step by step guide were every thing goes on the SD card.

      many thanks H

      Comment


      • #4
        Re: Tom Tom Navigator and WinCE 6.0

        Originally posted by maddogbukkake View Post
        Hello,

        I've recently got a Chinese GPS that has WinCE6.0 on it. They upgraded the software since the last one.
        I had TT7 working fine on WinCE 5 but I can't seem to get it going with 6.0
        I get this error

        Unable to Start
        No enough memory is available

        Its a 64mb, the hardware should be fine to run it. I've read other forums where people have had trouble, but I can't seem to find a workable solution. IGO8 works fine on it, but i really want to get tomtom working. If this has been discussed and solved, could you please post a link? I've tried searching here for 30 mins but can't find any discussion on this specific issue.

        cheers.
        You have the same problem with WinCE 4.2 device
        Try these versions of the TomTom 7910
        They also have functions that can run on WinCE 6.0 device and Chinese.
        But not work on everyone!
        TomTom

        Comment


        • #5
          Re: Tom Tom Navigator and WinCE 6.0

          hi thanks for your reply... but tomtom navigator loads up and then its just a blue screen saying no maps found. i think its somthing to do with the map im using, maybe not right one for tomtom nav 7? or im not cracking it right or not in the right place on the sd card?.

          thanks H

          Comment


          • #6
            Re: Tom Tom Navigator and WinCE 6.0

            Originally posted by hott View Post
            hi thanks for your reply... but tomtom navigator loads up and then its just a blue screen saying no maps found. i think its somthing to do with the map im using, maybe not right one for tomtom nav 7? or im not cracking it right or not in the right place on the sd card?.

            thanks H
            Inside the TomTom folder, you have a file Note_prj.dll ?

            inside the root of SD you need:
            1. TomTom Folder
            2. Map folder
            Last edited by Guidorenato; 5th August 2010, 17:07.

            Comment


            • #7
              Re: Tom Tom Navigator and WinCE 6.0

              hi, thanks for quick reply.. i dont have the files any more as i really got frustrated and i cant find were i got them from. so could you please tell me were to get the lates tomtom navigator 7 from and latest UK and Irland or Western Europe maps from. and a step by step guide what i need to do and were every thing goes in the sd card.

              i really appreciate you time. thanks H

              Comment


              • #8
                Re: Tom Tom Navigator and WinCE 6.0

                Originally posted by hott View Post
                hi, thanks for quick reply.. i dont have the files any more as i really got frustrated and i cant find were i got them from. so could you please tell me were to get the lates tomtom navigator 7 from and latest UK and Irland or Western Europe maps from. and a step by step guide what i need to do and were every thing goes in the sd card.

                i really appreciate you time. thanks H
                Download this and read the instructions very well:
                TomTom 7.910

                Read very well also the post on, read post all discussion !

                Download this Mapsetting:
                CliK---> Mapsetting Western_and_Central_Europe_2GB_850_2820

                Download map Western_and_Central_Europe_2GB_850_2820

                Comment


                • #9
                  Re: Tom Tom Navigator and WinCE 6.0

                  hi, thankyou very much for your help but iv managed to install tomtom nav 7 and maps but now i get message saying ''not enough memory'' this is really winding me up lol.. shull i just follow your guide from scratch or is there a easy fix for my problem?

                  thanks again H

                  Comment


                  • #10
                    Re: Tom Tom Navigator and WinCE 6.0

                    Originally posted by hott View Post
                    hi, thankyou very much for your help but iv managed to install tomtom nav 7 and maps but now i get message saying ''not enough memory'' this is really winding me up lol.. shull i just follow your guide from scratch or is there a easy fix for my problem?

                    thanks again H
                    You must follow the 3ad I've indicated.......put the file Mapsettings.cfg in to Mappa TT and Mapsetting Folders.
                    follow the instructions, well read the posts otherwise continue to ask questions!

                    Comment


                    • #11
                      Re: Tom Tom Navigator and WinCE 6.0

                      hi, i may sound really stupid but i really dont understand what to do lol.. iv downloaded the tomtom file and extracted it and i get loads of file. i tryed to foilow ur guide but i dont know were to put the files on my sd card. in my sd card i still have my maps and tomtom nav 7 files. do i have to delete all my files and start fresh or do i have to copy the some files and put them in my tomtom nav 7 stuff?

                      Comment


                      • #12
                        Re: Tom Tom Navigator and WinCE 6.0

                        Originally posted by hott View Post
                        hi, i may sound really stupid but i really dont understand what to do lol.. iv downloaded the tomtom file and extracted it and i get loads of file. i tryed to foilow ur guide but i dont know were to put the files on my sd card. in my sd card i still have my maps and tomtom nav 7 files. do i have to delete all my files and start fresh or do i have to copy the some files and put them in my tomtom nav 7 stuff?
                        You put the new SD (not the original SD) only my files:
                        1. TomTom Folder
                        2. Mappa TT (as it is written) Folder <--(with files inside the map ..... the file not the folder)

                        and follow the instructions

                        But .... your chinese .... you can access the SD files ..... not unlock?

                        Comment


                        • #13
                          Re: Tom Tom Navigator and WinCE 6.0

                          hi, i tried and followed your instuctions but i still get message saying not enough memory! and yes i can access my sd card on the head unit. i dont no why its not working.

                          Comment


                          • #14
                            Re: Tom Tom Navigator and WinCE 6.0

                            Originally posted by hott View Post
                            hi, i tried and followed your instuctions but i still get message saying not enough memory! and yes i can access my sd card on the head unit. i dont no why its not working.
                            you put the files Mapsettings.cfg in the map Folder ?

                            Comment


                            • #15
                              Re: Tom Tom Navigator and WinCE 6.0

                              yep and it did not work. very strange!!! dont not what im doing wrong!!!!! one other thing, my headunit has ipod ready and i can plug in ipods and control through steering wheel, chnage songs etc but say for example im listening to a song and iv listen to about 2mins of it, i then turn of the car and restart it, the song i was listening to does not start where i left it on, it goes back to the begining, its really annoying as my old pioneer unit use to do that. isit software related whith in the chiness head unit? and can i some how sort it out?

                              thanks H

                              Comment

                              Working...
                              X